Caraca sera mesmo ? putz que burro eu sou... Como eu iria imaginarrr esse detalhe ?? ehehe
Po, valeu pela dica, vou entrar la e ver... Mas que usar 8G de ram linearmente sem mutreta é o bixo a isso é, eheheh viva os 8 BYtes On Sat, Sep 27, 2008 at 8:18 PM, Wanderson Tinti <[EMAIL PROTECTED]> wrote: > Boa noite Leonardo. > > Parece que seu caminho é: /usr/src/sys/i386/conf. O correto seria > /usr/src/sys/amd64/conf. > Já que a saida do seu comando uname -a mostra amd64. > > Att, > > 2008/9/27 Leonardo Augusto <[EMAIL PROTECTED]>: >> Bom fiz com o RELENG_7 compilou tudo kernel GENERIC e reboot OK >> >> server# uname -a >> FreeBSD server.intervir.no-ip.org 7.1-PRERELEASE FreeBSD >> 7.1-PRERELEASE #0: Sat Sep 27 03:50:43 UTC 2008 >> [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC amd64 >> >> Como se nota esta no 7.1 PRERELEASE... >> Se eu fizer para o 7_0 vai ser o 7.0 atualizado ? pq a versao que est >> ano ftp é de fevereiro de 2008, ja vai ter as atualizacoes do bind e >> etc ? >> >> Bom, aí fui recompilar o kernel desse 7.1... para por ipfw e etc. >> Simplemente copiei o GENERIC para K1 e: >> >> /usr/sbin/config K1... >> >> Da o seguinte erro: >> ------------------------------------------------------ >> server# /usr/sbin/config K1 >> Kernel build directory is ../compile/K1 >> Don't forget to do ``make cleandepend && make depend'' >> server# cd ../compile/K1/ >> server# make cleandepend >> rm -f .depend machine amd64 >> cd ../../../modules; >> MAKEOBJDIRPREFIX=/usr/src/sys/i386/compile/K1/modules >> KMODDIR=/boot/kernel MACHINE=i386 >> KERNBUILDDIR="/usr/src/sys/i386/compile/K1" make cleandepend >> ===> aac (cleandepend) >> rm -f @ machine amd64 >> rm -f .depend GPATH GRTAGS GSYMS GTAGS >> ===> accf_data (cleandepend) >> rm -f @ machine amd64 >> rm -f .depend GPATH GRTAGS GSYMS GTAGS >> ===> accf_http (cleandepend) >> rm -f @ machine amd64 >> rm -f .depend GPATH GRTAGS GSYMS GTAGS >> ===> acpi (cleandepend) >> ===> acpi/acpi (cleandepend) >> "Makefile", line 4: "ACPI can only be compiled into the kernel on the >> amd64 and ia64 platforms" >> *** Error code 1 >> >> Stop in /usr/src/sys/modules/acpi. >> *** Error code 1 >> >> Stop in /usr/src/sys/modules. >> *** Error code 1 >> >> Stop in /usr/src/sys/i386/compile/K1. >> ------------------------------------------------------ >> >> O arquivo do kernel esta abaixo : >> >> cpu I686_CPU >> ident K1 >> >> options SCHED_ULE # ULE scheduler >> options PREEMPTION # Enable kernel thread preemption >> options INET # InterNETworking >> options INET6 # IPv6 communications protocols >> options SCTP # Stream Control Transmission >> Protocol >> options FFS # Berkeley Fast Filesystem >> options SOFTUPDATES # Enable FFS soft updates support >> options UFS_ACL # Support for access control lists >> options UFS_DIRHASH # Improve performance on big >> directories >> options UFS_GJOURNAL # Enable gjournal-based UFS >> journaling >> options MD_ROOT # MD is a potential root device >> options NFSCLIENT # Network Filesystem Client >> options NFSSERVER # Network Filesystem Server >> options NFSLOCKD # Network Lock Manager >> options NFS_ROOT # NFS usable as /, requires NFSCLIENT >> options MSDOSFS # MSDOS Filesystem >> options CD9660 # ISO 9660 Filesystem >> options PROCFS # Process filesystem (requires >> PSEUDOFS) >> options PSEUDOFS # Pseudo-filesystem framework >> options GEOM_PART_GPT # GUID Partition Tables. >> options GEOM_LABEL # Provides labelization >> options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] >> options COMPAT_FREEBSD4 # Compatible with FreeBSD4 >> options COMPAT_FREEBSD5 # Compatible with FreeBSD5 >> options COMPAT_FREEBSD6 # Compatible with FreeBSD6 >> options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI >> options KTRACE # ktrace(1) support >> options STACK # stack(9) support >> options SYSVSHM # SYSV-style shared memory >> options SYSVMSG # SYSV-style message queues >> options SYSVSEM # SYSV-style semaphores >> options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time >> extensions >> options KBD_INSTALL_CDEV # install a CDEV entry in /dev >> options ADAPTIVE_GIANT # Giant mutex is adaptive. >> options STOP_NMI # Stop CPUS using NMI instead of IPI >> options AUDIT # Security event auditing >> #options KDTRACE_HOOKS # Kernel DTrace hooks >> >> # To make an SMP kernel, the next two lines are needed >> options SMP # Symmetric MultiProcessor Kernel >> device apic # I/O APIC >> >> # CPU frequency control >> device cpufreq >> >> # Bus support. >> >> device pci >> # ATA and ATAPI devices >> device ata >> device atadisk # ATA disk drives >> device ataraid # ATA RAID drives >> device atapicd # ATAPI CDROM drives >> device atapifd # ATAPI floppy drives >> device atapist # ATAPI tape drives >> options ATA_STATIC_ID # Static device numbering >> >> # SCSI Controllers >> device mpt # LSI-Logic MPT-Fusion >> >> # SCSI peripherals >> device scbus # SCSI bus (required for SCSI) >> device ch # SCSI media changers >> device da # Direct Access (disks) >> device sa # Sequential Access (tape etc) >> device cd # CD >> device pass # Passthrough device (direct SCSI access) >> device ses # SCSI Environmental Services (and SAF-TE) >> # RAID controllers interfaced to the SCSI subsystem >> device iir # Intel Integrated RAID >> >> # RAID controllers >> device aac # Adaptec FSA RAID >> device mfi # LSI MegaRAID SAS >> >> # atkbdc0 controls both the keyboard and the PS/2 mouse >> device atkbdc # AT keyboard controller >> device atkbd # AT keyboard >> device psm # PS/2 mouse >> >> device kbdmux # keyboard multiplexer >> >> device vga # VGA video card driver >> >> device splash # Splash screen and screen saver support >> >> # syscons is the default console driver, resembling an SCO console >> device sc >> >> device agp # support several AGP chipsets >> >> >> # Serial (COM) ports >> device sio # 8250, 16[45]50 based serial ports >> device uart # Generic UART driver >> >> >> # PCI Ethernet NICs. >> device em # Intel PRO/1000 Gigabit Ethernet Family >> >> # PCI Ethernet NICs that use the common MII bus controller code. >> # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! >> device miibus # MII bus support >> device fxp # Intel EtherExpress PRO/100B (82557, 82558) >> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') >> >> # Pseudo devices. >> device loop # Network loopback >> device random # Entropy device >> device ether # Ethernet support >> device sl # Kernel SLIP >> device ppp # Kernel PPP >> device tun # Packet tunnel. >> device pty # Pseudo-ttys (telnet etc) >> device md # Memory "disks" >> device gif # IPv6 and IPv4 tunneling >> device faith # IPv6-to-IPv4 relaying (translation) >> device firmware # firmware assist module >> >> # The `bpf' device enables the Berkeley Packet Filter. >> # Be aware of the administrative consequences of enabling this! >> # Note that 'bpf' is required for DHCP. >> device bpf # Berkeley packet filter >> >> # USB support >> device uhci # UHCI PCI->USB interface >> device ohci # OHCI PCI->USB interface >> device ehci # EHCI PCI->USB interface (USB 2.0) >> device usb # USB Bus (required) >> #device udbp # USB Double Bulk Pipe devices >> device ugen # Generic >> device uhid # "Human Interface Devices" >> device ukbd # Keyboard >> device umass # Disks/Mass storage - Requires scbus and da >> device ums # Mouse >> -------------------------------------- >> >> Nao mudei nada do original GENERIC apenas removi os devices nao utilizados... >> Ja catei na net esse erro e ninguem conseguiu resolver, ehehe >> >> O que pode ser isso ? >> >> >> >> >> >> >> >>> cvsup para ".", você vai pegar o -current (FreeBSD 8.0) >>> >>> meu supfile é: >>> ----------------------CUT------------------- >>> *default host=cvsup2.FreeBSD.org >>> *default base=/var/db >>> *default prefix=/usr >>> *default release=cvs tag=RELENG_7_0 >>> *default delete use-rel-suffix >>> >>> *default compress >>> >>> src-all >>> ----------------------CUT------------------- >>> >>> se você usar RELENG_7 vai pegar o 7.1-PRERELEASE >>> >>> -- >> ------------------------- >> Histórico: http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >> > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
