Fiz o que falou, subi o modulo que ele cria. bcmw15_sys.ko e ficou asism:
note-marcos# kldstat
Id Refs Address Size Name
1 11 0xc0400000 9851fc kernel
2 1 0xc0d86000 6a32c acpi.ko
3 1 0xc48c6000 130000 bcmwl5_sys.ko
4 1 0xc4a36000 6000 i915.ko
5 1 0xc4a3c000 f000 drm.ko
note-marcos#
Ou seja, carregado o módulo, MAS, ainda não achou meu driver. Acredito que
esse ai não serve. :(
note-marcos# cd /driver/
note-marcos# ls
Setup.exe bcm43xx.cat
bcmwl5.sys sp36684.cva
Wireless_Broadcom-802BGB/ bcm43xx64.cat
bcmwl564.sys sp36684.exe
Wireless_Broadcom_Vista/ bcmwl5.inf
bcmwl5_sys.ko* wifi_xp/
note-marcos# ifconfig
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
ether 00:16:d3:e3:4d:9c
inet 192.168.10.187 netmask 0xffffff00 broadcast 192.168.10.255
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:0a:e4:60:5c:70
ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
lladdr 0.a.e4.7.32.60.5c.70.a.2.ff.fe.0.0.0.0
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
note-marcos#
On Wed, Apr 23, 2008 at 7:02 PM, Carlos A. M. dos Santos <
[EMAIL PROTECTED]> wrote:
> 2008/4/23 Marcos Jesus Faria <[EMAIL PROTECTED]>:
> > ok...
> >
> > Executei os comandos baseado na explicação
> > http://www.freebsd.org/doc/en/books/handbook/config-network-setup.html
> >
> > # ndisgen bcmw16.inf bcmw16.sys
> >
> > e da erro na compilação.
> >
> > ./windrv.h:2531: error: extra brace group at end of initializer
> > ./windrv.h:2531: error: (near initialization for 'ndis_regvals[453]')
> > ./windrv.h:2533: error: extra brace group at end of initializer
> > ./windrv.h:2533: error: (near initialization for 'ndis_regvals[453]')
> > ./windrv.h:2534: error: extra brace group at end of initializer
> > ./windrv.h:2534: error: (near initialization for 'ndis_regvals[453]')
> > ./windrv.h:2536: error: extra brace group at end of initializer
> > ./windrv.h:2536: error: (near initialization for 'ndis_regvals[453]')
> > ./windrv.h:2537: error: extra brace group at end of initializer
> > ./windrv.h:2537: error: (near initialization for 'ndis_regvals[453]')
> > ./windrv.h:2539: error: extra brace group at end of initializer
> > ./windrv.h:2539: error: (near initialization for 'ndis_regvals[453]')
> > ./windrv.h:2540: error: extra brace group at end of initializer
> > ./windrv.h:2540: error: (near initialization for 'ndis_regvals[453]')
> > ./windrv.h:2540: error: extra brace group at end of initializer
> > ./windrv.h:2540: error: (near initialization for 'ndis_regvals[453]')
> > ./windrv.h:2541: error: expected '}' before ';' token
> > build failed. Exiting.
> >
> > Tentei com o driver do Xp e do Vista, ambos i386.
> >
> > Alguma outra dica..
>
> Baixa o driver fornecido pela HP para os notebooks Pavilion:
>
> ftp://ftp.hp.com/pub/softpaq/sp36501-37000/sp36684.exe
>
> Instala o pacote "cabextract" (archivers/cabextract).
>
> Depois:
>
> cabextract sp36684.exe
> ndisgen bcmwl5.inf bcmwl5.sys
>
> --
> Carlos A. M. dos Santos
> -------------------------
> Histórico: http://www.fug.com.br/historico/html/freebsd/
> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>
--
Abraços,
Marcos de Jesus Faria
11-8221-8802 cel.
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
