Bom dia a todos,
Alguém conseguiu saberia alguma solução?
Pensei em mexer no código do Brasero antes de compilar para já pegar o
dev correto passado pelo cdrecord -scanbus.
Mas não sei se é certo.
Alguém teria uma outra solução?
Ou tentar instalar o k3b e ver no q dá?
Abraços,
Rafael.
On 8/29/07, Rafael Stockler <[EMAIL PROTECTED]> wrote:
> On 8/29/07, Giancarlo Rubio <[EMAIL PROTECTED]> wrote:
> > Uma outra pergunta
> > como root vc consegue gravar??
>
> Tentei gravar com o brasero tb e não consegui.
>
>
> >
> > 2007/8/29, Rafael Stockler <[EMAIL PROTECTED]>:
> > > On 8/29/07, Giancarlo Rubio <[EMAIL PROTECTED]> wrote:
> > > > Seu kernel tem a opcao device cd???
> > > >
> > >
> > > Tem sim,
> > >
> > > device cd
> > > device atapicd
> > > device atapicam
> > > device pass
> > >
> > > Erro do brasero segue abaixo, o interessante q ele tenta acessar o
> > > dev=-2,-2,-2 mas pelo q vi do scanbus do cdrecord precisa ser 1,0,0,
> > > mas não sei onde muda isso.
> > >
> > > process (BraseroCDRecord) got varg:
> > > cdrecord
> > > -v
> > > dev=/dev/cd0
> > > gracetime=0
> > > speed=56
> > > driveropts=burnfree
> > > -dao
> > > fs=16m
> > > -audio
> > > -swab
> > > -pad
> > > -useinfo
> > > -text
> > > /var/tmp/brasero_tmp_HKvet7/Track00.cdr
> > > process (BraseroCDRecord) launching command
> > > process (BraseroCDRecord) stderr: cdrecord: Operation not permitted.
> > > WARNING: Cannot do mlockall(2).
> > > process (BraseroCDRecord) stderr: cdrecord: WARNING: This causes a
> > > high risk for buffer underruns.
> > > process (BraseroCDRecord) stdout: Cdrecord-Clone 2.01
> > > (i386-unknown-freebsd6.2) Copyright (C) 1995-2004 J
> > > process (BraseroCDRecord) stderr: cdrecord: Operation not permitted.
> > > WARNING: Cannot set RR-scheduler
> > > process (BraseroCDRecord) stdout: TOC Type: 0 = CD-DA
> > > process (BraseroCDRecord) stderr: cdrecord: Permission denied.
> > > WARNING: Cannot set priority using setpriority().
> > > process (BraseroCDRecord) stdout: EOF
> > > process (BraseroCDRecord) stderr: cdrecord: WARNING: This causes a
> > > high risk for buffer underruns.
> > > process (BraseroCDRecord) stderr: scsidev: '/dev/cd0'
> > > process (BraseroCDRecord) stderr: devname: '/dev/cd0'
> > > process (BraseroCDRecord) stderr: scsibus: -2 target: -2 lun: -2
> > > process (BraseroCDRecord) stderr: cdrecord: Invalid argument. Open by
> > > 'devname' not supported on this OS. Cannot open SCSI driver.
> > > job (BraseroCDRecord) asked to stop
> > > status = 1
> > > error = 9
> > > message = "You don't seem to have the required permission to use
> > > this drive"
> > > iter (BraseroCDRecord) stopping
> > > process (BraseroCDRecord) got killed
> > > process (BraseroCDRecord) stderr: cdrecord: Invalid argument. Open by
> > > 'devname' not supported on this OS. Cannot open SCSI driver.cdrecord:
> > > For possible targets try 'cdrecord -scanbus'. Make sure you are root.
> > > job (BraseroCDRecord) asked to stop
> > > status = 1
> > > error = 9
> > > message = "You don't seem to have the required permission to use
> > > this drive"
> > > iter (BraseroCDRecord) stopping
> > > process (BraseroCDRecord) stderr: cdrecord: Invalid argument. Open by
> > > 'devname' not supported on this OS. Cannot open SCSI driver.cdrecord:
> > > For possible targets try 'cdrecord -scanbus'. Make sure you are
> > > root.cdrecord: For possible transport specifiers try 'cdrecord
> > > dev=help'.
> > > job (BraseroCDRecord) asked to stop
> > > status = 1
> > > error = 9
> > > message = "You don't seem to have the required permission to use
> > > this drive"
> > > iter (BraseroCDRecord) stopping
> > > iter (BraseroCDRecord) stopped
> > > job (BraseroCDRecord) got out of loop
> > > iter (BraseroCDRecord) stopped
> > > job (BraseroCDRecord) got out of loop
> > > iter (BraseroCDRecord) stopped
> > > job (BraseroCDRecord) got out of loop
> > > job (BraseroCDRecord) set_task
> > > Session error : You don't seem to have the required permission to use
> > > this drive
> > >
> > >
> > > >
> > > > 2007/8/29, Rafael Stockler <[EMAIL PROTECTED]>:
> > > > > Boa noite lista,
> > > > >
> > > > > Estou com um problema.
> > > > >
> > > > > Recompilei o kernel com o atapicam, coloquei no loader.conf carregar
> > > > > asim:
> > > > >
> > > > > atapicam_load="YES"
> > > > > hw.ata.atapi_dma=1
> > > > >
> > > > > Mesmo assim está geranod essa mensagem no terminal quando coloco o cd
> > > > > virgem:
> > > > >
> > > > > (cd0:ahc0:0:4:0): READ TOC/PMA/ATIP {MMC Proposed}. CDB: 43 2 0 0 0 0
> > > > > c 0 c 0
> > > > > (cd0:ahc0:0:4:0): CAM Status: SCSI Status Error
> > > > > (cd0:ahc0:0:4:0): SCSI Status: Check Condition
> > > > > (cd0:ahc0:0:4:0): ILLEGAL REQUEST asc:24,0
> > > > > (cd0:ahc0:0:4:0): Invalid field in CDB
> > > > > (cd0:ahc0:0:4:0): Unretryable error
> > > > >
> > > > > Não consigo gravar de jeito nenhum no brasero, sempre diz q to sem
> > > > > permissão para gravar nesse disco.
> > > > >
> > > > > arquivo devfs.conf:
> > > > >
> > > > > perm cd0 0666
> > > > > perm xpt0 0666
> > > > > perm pass0 0666
> > > > >
> > > > > # camcontrol devlist
> > > > > <HL-DT-ST RW/DVD GCC-4480B 1.00> at scbus1 target 0 lun 0
> > > > > (cd0,pass0)
> > > > >
> > > > >
> > > > > # cdrecord -scanbus
> > > > > Cdrecord-Clone 2.01 (i386-unknown-freebsd6.2) Copyright (C) 1995-2004
> > > > > J�rg Schilling
> > > > > Using libscg version 'schily-0.8'.
> > > > > scsibus1:
> > > > > 1,0,0 100) 'HL-DT-ST' 'RW/DVD GCC-4480B' '1.00' Removable
> > > > > CD-ROM
> > > > > 1,1,0 101) *
> > > > > 1,2,0 102) *
> > > > > 1,3,0 103) *
> > > > > 1,4,0 104) *
> > > > > 1,5,0 105) *
> > > > > 1,6,0 106) *
> > > > > 1,7,0 107) *
> > > > >
> > > > > # cdrecord -dev=1,0,0 -checkdrive
> > > > > Cdrecord-Clone 2.01 (i386-unknown-freebsd6.2) Copyright (C) 1995-2004
> > > > > J�rg Schilling
> > > > > scsidev: '1,0,0'
> > > > > scsibus: 1 target: 0 lun: 0
> > > > > Using libscg version 'schily-0.8'.
> > > > > Device type : Removable CD-ROM
> > > > > Version : 0
> > > > > Response Format: 1
> > > > > Vendor_info : 'HL-DT-ST'
> > > > > Identifikation : 'RW/DVD GCC-4480B'
> > > > > Revision : '1.00'
> > > > > Device seems to be: Generic mmc2 DVD-ROM.
> > > > > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> > > > > Driver flags : MMC-2 SWABAUDIO BURNFREE
> > > > > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> > > > > RAW/R96R
> > > > >
> > > > > Alguém saberia o que estou faendo de errado ou esquecendo de fazer?
> > > > >
> > > > > abraços,
> > > > >
> > > > > Rafael.
> > > > > -------------------------
> > > > > Histórico: http://www.fug.com.br/historico/html/freebsd/
> > > > > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
> > > > >
> > > >
> > > >
> > > > --
> > > > Giancarlo Rubio
> > > > -------------------------
> > > > Histórico: http://www.fug.com.br/historico/html/freebsd/
> > > > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
> > > >
> > > -------------------------
> > > Histórico: http://www.fug.com.br/historico/html/freebsd/
> > > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
> > >
> >
> >
> > --
> > Giancarlo Rubio
> > -------------------------
> > Histórico: http://www.fug.com.br/historico/html/freebsd/
> > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
> >
>
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
