senhores,
estou um tanto quanto parado em relacao a "subir" uma placa dlink dwlg510.
abaixo algumas infos;
* * * * *
egypcio# dmesg |grep ath
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
egypcio# kldstat
Id Refs Address Size Name
1 17 0xc0400000 691928 kernel
2 1 0xc0a92000 cea8 if_wi.ko
3 1 0xc0a9f000 fa20 if_ath.ko
4 3 0xc0aaf000 3015c ath_hal.ko
5 2 0xc0ae0000 3fbc ath_rate.ko
6 1 0xc0ae4000 2d48 wlan_wep.ko
7 1 0xc0ae7000 6da4 wlan_ccmp.ko
8 1 0xc0aee000 4040 wlan_tkip.ko
9 1 0xc3309000 e000 ext2fs.ko
egypcio# ifconfig
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::20c:6eff:fe7e:941b%sis0 prefixlen 64 scopeid 0x1
inet 192.168.2.250 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:0c:6e:7e:94:1b
media: Ethernet autoselect (10baseT/UTP)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
egypcio# cat /boot/loader.conf
## Beastie Logo
loader_logo="beastiebw"
## Wireless
# ndis_load="YES"
# if_ndis_load="YES"
# rt61_sys_load="YES"
if_ath_load="YES"
if_wi_load="YES"
wlan_wep_load="YES"
wlan_ccmp_load="YES"
egypcio# uname -a
FreeBSD egypcio 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC
2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386
wlan_tkip_load="YES"
* * * * *
terminei a instalacao a pouco.
nao consigo, nem vejo, a dlink "subir". alguma dica de como proceder?
alguma picuinha me empata (:
aquele velho abraco \o/
_
Vinicius de A.
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
