Estou tentando conectar com um WinXP-Pro. Nas propriedade da conexão selecionei "Criptografia opcional", com os protocolos: CHAP, CHAP(MS CHAP) e Microsoft CHAP versão 2.
On Fri, 28 Jan 2005 17:56:35 -0200, R. Filippus <[EMAIL PROTECTED]> wrote: > Boa tarde pessoal. > > Instalei o mpd-3.18_2 no FreeBSD 5.3-Stable, para servir como servidor > VPN de estações Windows. > > Já tive diversos problemas, varios erros, pois fiz varias alterações > nas confs do mpd.conf. > Então estou iniciando tudo denovo e tentar debugar o problema com a > possivel ajuda de vc´s. > > Abaixo segue os arquivos do mpd, e o log apos digitar mpd -k. > > # ------------------------- > # mpd.conf > # ------------------------- > > default: > load pptp0 # Load the pptp session > load pptp1 > pptp0: > new -i ng0 pptp0 pptp0 > set iface disable on-demand > set iface enable proxy-arp > set bundle disable multilink > set link yes acfcomp protocomp > set link no pap chap > set link enable chap > set link keep-alive 60 180 > set ipcp yes vjcomp > set ipcp ranges 192.168.250.1/32 192.168.250.5/30 > set ipcp dns 192.168.251.1 > set ipcp nbns 192.168.251.1 > set bundle enable compression > set ccp yes mppc > set ccp no mpp-e40 > set ccp yes mpp-e128 > set ccp yes mpp-stateless > set bundle yes crypt-reqd > #pptp1: > new -i ng1 pptp1 pptp1 > set iface disable on-demand > #set iface enable proxy-arp > set bundle disable multilink > set link yes acfcomp protocomp > set link no pap chap > set link enable chap > set link keep-alive 60 180 > set ipcp yes vjcomp > set ipcp ranges 192.168.250.1/32 192.168.250.9/30 > set ipcp dns 192.168.251.1 > set ipcp nbns 192.168.251.1 > set bundle enable compression > set ccp yes mppc > set ccp no mpp-e40 > set ccp yes mpp-e128 > set ccp yes mpp-stateless > set bundle yes crypt-reqd > > # ------------------------- > # mpd.links > # ------------------------- > > pptp0: > set link type pptp > set pptp self 192.168.250.252 > set pptp enable incoming > set pptp disable originate > pptp1: > set link type pptp > set pptp self 192.168.250.252 > set pptp enable incoming > set pptp disable originate > > # ------------------------- > # mpd.secret > # ------------------------- > > MyLogin MyPassword > PeerLogin PeerPassword > ConsoleLogin ConsolePassword > > teste "teste" > > # ------------------------- > # Abaixo segue o log. > # ------------------------- > > guaxinim# ps -ax | grep mpd > 586 p0 R+ 0:00.00 grep mpd > guaxinim# mpd -k > Multi-link PPP for FreeBSD, by Archie L. Cobbs. > Based on iij-ppp, by Toshiharu OHNO. > mpd: pid 587, version 3.18 ([EMAIL PROTECTED] 15:41 27-Jan-2005) > Usage: load system > [pptp1] ppp node is "mpd587-pptp1" > mpd: local IP address for PPTP is 192.168.250.252 > [pptp1] using interface ng1 > [pptp1] multilink option required for 4 links > mpd: option "#CHAP" unknown > mpd: option "authentication" unknown > Usage: set ipcp ranges self/width peer/width > [pptp1] #DNS: invalid IP address > [pptp1] #NetBIOS: invalid IP address > mpd: option "#Compression" unknown > mpd: option "and" unknown > [pptp1:device] mpd: PPTP connection from 192.168.250.253:2694 > pptp0: attached to connection with 192.168.250.253:2694 > [pptp1] IFACE: Open event > [pptp1] IPCP: Open event > [pptp1] IPCP: state change Initial --> Starting > [pptp1] IPCP: LayerStart > [pptp1] IPCP: Open event > [pptp1] bundle: OPEN event in state CLOSED > [pptp1] opening link "pptp1"... > [pptp1] opening link "#Create"... > [pptp1] opening link "netgraph"... > [pptp1] opening link "device"... > [pptp1] link: OPEN event > [pptp1] LCP: Open event > [pptp1] LCP: state change Initial --> Starting > [pptp1] LCP: LayerStart > [#Create] link: OPEN event > [#Create] LCP: Open event > [#Create] LCP: state change Initial --> Starting > [#Create] LCP: LayerStart > [netgraph] link: OPEN event > [netgraph] LCP: Open event > [netgraph] LCP: state change Initial --> Starting > [netgraph] LCP: LayerStart > [device] link: OPEN event > [device] LCP: Open event > [device] LCP: state change Initial --> Starting > [device] LCP: LayerStart > [pptp1] device: OPEN event in state DOWN > [pptp1] attaching to peer's outgoing call > [pptp1] device is now in state OPENING > [#Create] device: OPEN event in state DOWN > [#Create] this link has no type set > [#Create] device is now in state DOWN > [netgraph] device: OPEN event in state DOWN > [netgraph] this link has no type set > [netgraph] device is now in state DOWN > [device] device: OPEN event in state DOWN > [device] this link has no type set > [device] device is now in state DOWN > [pptp1] device: UP event in state OPENING > [pptp1] device is now in state UP > [pptp1] link: UP event > [pptp1] link: origination is remote > [pptp1] LCP: Up event > [pptp1] LCP: state change Starting --> Req-Sent > [pptp1] LCP: phase shift DEAD --> ESTABLISH > [pptp1] LCP: SendConfigReq #1 > ACFCOMP > PROTOCOMP > MRU 1500 > MAGICNUM 9dd0e9ef > MP MRRU 1600 > MP SHORTSEQ > ENDPOINTDISC [802.1] 00 11 11 25 ad ac > pptp0-0: ignoring SetLinkInfo > [pptp1] LCP: rec'd Configure Request #0 link 0 (Req-Sent) > MRU 1400 > MAGICNUM 272a74ed > PROTOCOMP > ACFCOMP > CALLBACK > Not supported > [pptp1] LCP: SendConfigRej #0 > CALLBACK > [pptp1] LCP: rec'd Configure Request #1 link 0 (Req-Sent) > MRU 1400 > MAGICNUM 272a74ed > PROTOCOMP > ACFCOMP > [pptp1] LCP: SendConfigAck #1 > MRU 1400 > MAGICNUM 272a74ed > PROTOCOMP > ACFCOMP > [pptp1] LCP: state change Req-Sent --> Ack-Sent > [pptp1] LCP: SendConfigReq #2 > ACFCOMP > PROTOCOMP > MRU 1500 > MAGICNUM 9dd0e9ef > MP MRRU 1600 > MP SHORTSEQ > ENDPOINTDISC [802.1] 00 11 11 25 ad ac > [pptp1] LCP: rec'd Configure Reject #2 link 0 (Ack-Sent) > MP MRRU 1600 > MP SHORTSEQ > ENDPOINTDISC [802.1] 00 11 11 25 ad ac > [pptp1] LCP: SendConfigReq #3 > ACFCOMP > PROTOCOMP > MRU 1500 > MAGICNUM 9dd0e9ef > [pptp1] LCP: rec'd Configure Ack #3 link 0 (Ack-Sent) > ACFCOMP > PROTOCOMP > MRU 1500 > MAGICNUM 9dd0e9ef > [pptp1] LCP: state change Ack-Sent --> Opened > [pptp1] LCP: phase shift ESTABLISH --> AUTHENTICATE > [pptp1] LCP: auth: peer wants nothing, I want nothing > [pptp1] LCP: authorization successful > [pptp1] LCP: phase shift AUTHENTICATE --> NETWORK > [pptp1] setting interface ng1 MTU to 1400 bytes > [pptp1] up: 1 link, total bandwidth 64000 bps > [pptp1] IPCP: Up event > [pptp1] IPCP: state change Starting --> Req-Sent > [pptp1] IPCP: SendConfigReq #1 > IPADDR 192.168.250.252 > COMPPROTO VJCOMP, 16 comp. channels, no comp-cid > [pptp1] CCP: Open event > [pptp1] CCP: state change Initial --> Starting > [pptp1] CCP: LayerStart > [pptp1] CCP: Up event > [pptp1] CCP: state change Starting --> Req-Sent > [pptp1] CCP: SendConfigReq #1 > [pptp1] CCP: Checking whether 40 bits are enabled -> no > [pptp1] CCP: Checking whether 56 bits are enabled -> no > [pptp1] CCP: Checking whether 128 bits are enabled -> yes > MPPC > 0x01000040: MPPE, 128 bit, stateless > [pptp1] ECP: Open event > [pptp1] ECP: state change Initial --> Starting > [pptp1] ECP: LayerStart > [pptp1] ECP: Up event > [pptp1] ECP: state change Starting --> Req-Sent > [pptp1] ECP: SendConfigReq #1 > [pptp1] LCP: LayerUp > [pptp1] LCP: rec'd Ident #2 link 0 (Opened) > MESG: MSRASV5.10 > pptp0-0: ignoring SetLinkInfo > [pptp1] LCP: rec'd Ident #3 link 0 (Opened) > MESG: MSRAS-0-ADMIN03 > [pptp1] CCP: rec'd Configure Request #4 link 0 (Req-Sent) > MPPC > 0x01000001: MPPC > [pptp1] CCP: Checking whether 40 bits are enabled -> no > [pptp1] CCP: Checking whether 56 bits are enabled -> no > [pptp1] CCP: Checking whether 128 bits are enabled -> yes > [pptp1] CCP: SendConfigNak #4 > MPPC > 0x01000040: MPPE, 128 bit, stateless > [pptp1] IPCP: rec'd Configure Request #5 link 0 (Req-Sent) > IPADDR 0.0.0.0 > no IP address available for peer! > NAKing with 0.0.0.0 > PRIDNS 0.0.0.0 > NAKing with 192.168.251.1 > PRINBNS 0.0.0.0 > NAKing with 192.168.251.1 > SECDNS 0.0.0.0 > SECNBNS 0.0.0.0 > [pptp1] IPCP: SendConfigRej #5 > SECDNS 0.0.0.0 > SECNBNS 0.0.0.0 > [pptp1] IPCP: rec'd Configure Reject #1 link 0 (Req-Sent) > COMPPROTO VJCOMP, 16 comp. channels, no comp-cid > [pptp1] IPCP: SendConfigReq #2 > IPADDR 192.168.250.252 > [pptp1] CCP: rec'd Configure Reject #1 link 0 (Req-Sent) > MPPC > [pptp1] CCP: SendConfigReq #2 > [pptp1] LCP: rec'd Protocol Reject #6 link 0 (Opened) > [pptp1] LCP: protocol ECP was rejected > [pptp1] ECP: protocol was rejected by peer > [pptp1] IPCP: failed to negotiate required encryption > [pptp1] IPCP: state change Req-Sent --> Stopped > [pptp1] IPCP: LayerFinish > [pptp1] ECP: state change Req-Sent --> Stopped > [pptp1] ECP: LayerFinish > [pptp1] bundle: CLOSE event in state OPENED > [pptp1] closing link "pptp1"... > [pptp1] closing link "#Create"... > [pptp1] closing link "netgraph"... > [pptp1] closing link "device"... > [#Create] link: CLOSE event > [#Create] LCP: Close event > [#Create] LCP: state change Starting --> Initial > [#Create] LCP: LayerFinish > [netgraph] link: CLOSE event > [netgraph] LCP: Close event > [netgraph] LCP: state change Starting --> Initial > [netgraph] LCP: LayerFinish > [device] link: CLOSE event > [device] LCP: Close event > [device] LCP: state change Starting --> Initial > [device] LCP: LayerFinish > [pptp1] link: CLOSE event > [pptp1] LCP: Close event > [pptp1] LCP: state change Opened --> Closing > [pptp1] LCP: phase shift NETWORK --> TERMINATE > [pptp1] setting interface ng1 MTU to 1500 bytes > [pptp1] up: 0 links, total bandwidth 9600 bps > [pptp1] IPCP: Down event > [pptp1] IPCP: state change Stopped --> Starting > [pptp1] IPCP: LayerStart > [pptp1] CCP: Down event > [pptp1] CCP: state change Req-Sent --> Starting > [pptp1] CCP: Close event > [pptp1] CCP: state change Starting --> Initial > [pptp1] CCP: LayerFinish > [pptp1] ECP: Down event > [pptp1] ECP: state change Stopped --> Starting > [pptp1] ECP: LayerStart > [pptp1] ECP: Close event > [pptp1] ECP: state change Starting --> Initial > [pptp1] ECP: LayerFinish > [pptp1] closing link "pptp1"... > [pptp1] LCP: SendTerminateReq #4 > [pptp1] LCP: LayerDown > [pptp1] bundle: OPEN event in state CLOSED > [pptp1] opening link "pptp1"... > [pptp1] opening link "#Create"... > [pptp1] opening link "netgraph"... > [pptp1] opening link "device"... > [pptp1] link: CLOSE event > [pptp1] LCP: Close event > [#Create] device: CLOSE event in state DOWN > [#Create] this link has no type set > [#Create] device is now in state DOWN > [netgraph] device: CLOSE event in state DOWN > [netgraph] this link has no type set > [netgraph] device is now in state DOWN > [device] device: CLOSE event in state DOWN > [device] this link has no type set > [device] device is now in state DOWN > [#Create] link: OPEN event > [#Create] LCP: Open event > [#Create] LCP: state change Initial --> Starting > [#Create] LCP: LayerStart > [netgraph] link: OPEN event > [netgraph] LCP: Open event > [netgraph] LCP: state change Initial --> Starting > [netgraph] LCP: LayerStart > [device] link: OPEN event > [device] LCP: Open event > [device] LCP: state change Initial --> Starting > [device] LCP: LayerStart > [pptp1] link: OPEN event > [pptp1] LCP: Open event > [pptp1] LCP: state change Closing --> Stopping > [#Create] device: OPEN event in state DOWN > [#Create] this link has no type set > [#Create] device is now in state DOWN > [netgraph] device: OPEN event in state DOWN > [netgraph] this link has no type set > [netgraph] device is now in state DOWN > [device] device: OPEN event in state DOWN > [device] this link has no type set > [device] device is now in state DOWN > [pptp1] rec'd proto CCP during terminate phase > [pptp1] rec'd proto IPCP during terminate phase > [pptp1] rec'd proto IPCP during terminate phase > [pptp1] rec'd proto CCP during terminate phase > [pptp1] LCP: rec'd Terminate Ack #4 link 0 (Stopping) > [pptp1] LCP: state change Stopping --> Stopped > [pptp1] LCP: phase shift TERMINATE --> ESTABLISH > [pptp1] LCP: LayerFinish > [pptp1] device: CLOSE event in state UP > pptp0-0: clearing call > pptp0-0: killing channel > [pptp1] PPTP call terminated > [pptp1] IFACE: Close event > [pptp1] IPCP: Close event > [pptp1] IPCP: state change Starting --> Initial > [pptp1] IPCP: LayerFinish > [pptp1] IFACE: Close event > pptp0: closing connection with 192.168.250.253:2694 > [pptp1] IFACE: Close event > [pptp1] device is now in state CLOSING > [pptp1] bundle: CLOSE event in state OPENED > [pptp1] closing link "pptp1"... > [pptp1] closing link "#Create"... > [pptp1] closing link "netgraph"... > [pptp1] closing link "device"... > [pptp1] device: DOWN event in state CLOSING > [pptp1] device is now in state DOWN > [#Create] link: CLOSE event > [#Create] LCP: Close event > [#Create] LCP: state change Starting --> Initial > [#Create] LCP: LayerFinish > [netgraph] link: CLOSE event > [netgraph] LCP: Close event > [netgraph] LCP: state change Starting --> Initial > [netgraph] LCP: LayerFinish > [device] link: CLOSE event > [device] LCP: Close event > [device] LCP: state change Starting --> Initial > [device] LCP: LayerFinish > [pptp1] link: CLOSE event > [pptp1] LCP: Close event > [pptp1] LCP: state change Stopped --> Closed > [pptp1] device: DOWN event in state DOWN > [pptp1] device is now in state DOWN > [pptp1] link: DOWN event > [pptp1] LCP: Down event > [pptp1] LCP: state change Closed --> Initial > [pptp1] LCP: phase shift ESTABLISH --> DEAD > [#Create] device: CLOSE event in state DOWN > [#Create] this link has no type set > [#Create] device is now in state DOWN > [netgraph] device: CLOSE event in state DOWN > [netgraph] this link has no type set > [netgraph] device is now in state DOWN > [device] device: CLOSE event in state DOWN > [device] this link has no type set > [device] device is now in state DOWN > pptp0: CID 0x3746 in SetLinkInfo not found > [pptp1] link: DOWN event > [pptp1] LCP: Down event > pptp0: killing connection with 192.168.250.253:2694 > > -- > Atenciosamente, > R. Filippus > -- Atenciosamente, R. Filippus _______________________________________________________________ Para enviar um novo email para a lista: freebsd@fug.com.br Sair da Lista: http://mail.fug.com.br/mailman/listinfo/freebsd_fug.com.br Historico: http://www4.fugspbr.org/lista/html/FUG-BR/
