hi! we're still working on this. It's going to take some time.
thanks, -adrian On Sun, 13 Sep 2020 at 11:12, Anthony Jenkins via freebsd-wireless < freebsd-wireless@freebsd.org> wrote: > I have a Killer 1535 802.11ac wireless card (chipset = Qualcomm Atheros > QCA6174). I am using the ath10k/athp driver from git repo > https://github.com/erikarn/athp.git . Driver loads, but trying to start > the interface fails. What should I be looking at to fix this? > > service netif start wlan2: > --------------------------------------------------------------------------- > ifconfig: SIOCIFCREATE2: Input/output error > ifconfig: interface wlan2 does not exist > ifconfig: interface wlan2 does not exist > ifconfig: interface wlan2 does not exist > ifconfig: interface wlan2 does not exist > Starting wpa_supplicant. > /etc/rc.d/wpa_supplicant: WARNING: failed to start wpa_supplicant > ifconfig: interface wlan2 does not exist > rtsol: failed to get link layer information for wlan2 > rtsol: failed to initialize wlan2 > Starting Network: wlan2. > ifconfig: interface wlan2 does not exist > --------------------------------------------------------------------------- > > Kernel messages: > --------------------------------------------------------------------------- > athp0: ath10k_start: called; state=0 > athp0: ath10k_start: state=1 > athp0: ath10k_download_cal_dt: TODO: device tree check > athp0: ath10k_wmi_event_service_ready_work: TODO: EEPROM code: 0x00000069 > athp0: htc ep 2 out of TX credits (0 < 1) > athp0: htc ep 2 out of TX credits (0 < 1) > ... > athp0: htc ep 2 out of TX credits (0 < 1) > athp0: htc ep 2 out of TX credits (0 < 1) > athp0: ath10k_wmi_cmd_send: failed (-35) > athp0: failed to enable PMF QOS: -35 > athp0: ath10k_core_stop: state=1 > athp0: ath10k_wait_for_suspend: state=1 > athp0: ath10k_wmi_pdev_suspend_target: called > athp0: htc ep 2 out of TX credits (0 < 1) > athp0: htc ep 2 out of TX credits (0 < 1) > ... > athp0: htc ep 2 out of TX credits (0 < 1) > athp0: htc ep 2 out of TX credits (0 < 1) > athp0: ath10k_wmi_cmd_send: failed (-35) > athp0: could not suspend target (-35) > athp0: ath10k_pci_irq_sync: TODO > athp0: ath10k_pci_kill_tasklet: called > athp0: ath10k_htt_tx_free: called > athp0: ath10k_htt_tx_free: tearing down htt locks > athp0: athp_vap_create: ath10k_start failed; ret=-35 > --------------------------------------------------------------------------- > > Some notable errors from 'kldload if_athp.ko': > > * Driver fails to load firmware file athp_QCA6174_hw3.0/firmware-5.bin; > it does load file 'athp_QCA6174_hw3.0_firmware-4.bin'. > > athp0: ath10k_fetch_fw_file: firmware_get: athp_cal-pci-athp0.bin > athp_cal-pci-athp0.bin: could not load firmware image, error 2 > athp0: ath10k_fetch_fw_file: firmware_get: athp_QCA6174_hw3.0_board.bin > firmware: 'athp_QCA6174_hw3.0_board.bin' version 1: 8124 bytes loaded at > 0xffffffff84458000 > athp0: ath10k_fetch_fw_file: firmware_get: > athp_QCA6174_hw3.0_firmware-5.bin > athp_QCA6174_hw3.0_firmware-5.bin: could not load firmware image, error 2 > athp0: could not fetch firmware file 'athp_QCA6174_hw3.0/firmware-5.bin': > -1 > athp0: ath10k_fetch_fw_file: firmware_get: > athp_QCA6174_hw3.0_firmware-4.bin > firmware: 'athp_QCA6174_hw3.0_firmware-4.bin' version 1: 733784 bytes > loaded at 0xffffffff8445d000 > > I assume file 'athp_cal-pci-athp0.bin' is optional calibration data. > > * 'htc ep 2 out of TX credits (0 < 1)' repeated 144 times > > * ath10k_wmi_cmd_send failure > > athp0: ath10k_wmi_cmd_send: failed (-35) > athp0: could not suspend target (-35) > > > My full kernel messages from kldload(8) and netif are at > http://www.qtchat.org/~ajenkins/ . > > Thanks, > Anthony Jenkins > > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org > " > _______________________________________________ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
