https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=228787
J.R. Oldroyd <f...@opal.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |f...@opal.com
--- Comment #6 from J.R. Oldroyd <f...@opal.com> ---
Same on an Asus S510UQ running 11.2:
dmesg:
ubt0 on uhub0
ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.10, addr 3> on
usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ubt0: ubt_ctrl_write_callback:780: control transfer failed: USB_ERR_TIMEOUT
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command
OGF=0x3, OCF=0x3. Timeout
# usbconfig dump_device_desc
ugen0.4: <vendor 0x8087 product 0x0a2b> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON (100mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x00e0 <Wireless controller>
bDeviceSubClass = 0x0001
bDeviceProtocol = 0x0001
bMaxPacketSize0 = 0x0040
idVendor = 0x8087
idProduct = 0x0a2b
bcdDevice = 0x0010
iManufacturer = 0x0000 <no string>
iProduct = 0x0000 <no string>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
Running the rc.d/bluetooth setup commands manually, all the ngctl commands
complete ok; the first hccontrol command fails with the timeout.
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
