Hi Adrian, Thank you for the advice! Do you know of any boards that use the AR9280 or is it recommended to find a supported host board and install an AR9280 mPCIe card into it?
I found the following pages: https://github.com/freebsd/freebsd-wifi-build/wiki/Carambola2 http://shop.8devices.com/wifi4things/carambola2-DVK This board seems to be supported and can be purchased. However, it only supports the 2.4 GHz band. Other than that, it seems great: - Single AR9331 SoC that can run FreeBSD with built-in Wi-Fi. - GPIO since I hope to control some switches from the board as well. Do you have experience with this board or do you know of anything similar that also supports 5 GHz? Thank you, Alana On Fri, Sep 8, 2017 at 9:02 AM, Adrian Chadd <[email protected]> wrote: > hi! > > For now, stick with AR9280 devices. AR9380 and later doesn't work well > due to chip design :( > > > > -adrian > > > On 7 September 2017 at 20:42, Goo Gle <[email protected]> wrote: > > Hello, > > > > I'd like to test some long distance Wi-Fi links (a few kilometers) and > > heard that FreeBSD has built-in support for TDMA which enables these > types > > of links. I'm admittedly new to FreeBSD and would like to know what's a > > good board/router that's well supported by FreeBSD. Something relatively > > cheap and supports at least 802.11n (both 2.4 and 5 GHz) would be great! > > I'm based in USA if it affects availability. > > > > Thank you, > > Alana > > _______________________________________________ > > [email protected] mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@ > freebsd.org" > _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
