Hi,
Just updated a system from 11.0p10 to 11.1-RELEASE and I've noticed that
hostapd won't start on wlan0. RC script require "wlan_xauth.ko" which is
not part of GENERIC so extra recompilation is necessary especialy that
RC for hostapd require all kern modules in rc script.
Here is dmesg:
---------
170:ath0: <Atheros AR9485> mem 0xf7d00000-0xf7d7ffff irq 18 at device
0.0 on pci5
180:ath0: [HT] enabling HT modes
181:ath0: [HT] enabling short-GI in 20MHz mode
182:ath0: [HT] 1 stream STBC receive enabled
183:ath0: [HT] 1 RX streams; 1 TX streams
184:ath0: AR9485 mac 576.1 RF5110 phy 2457.9
185:ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
---------
I don't know why but N doesn't work for me, let this thing for later
discussion.
Here is my "rc.conf"
---------
wlans_ath0="wlan0"
create_args_wlan0="wlanmode hostap -bgscan"
ifconfig_wlan0="10.0.0.1 netmask 255.255.255.0 ssid 'freebsd-power' mode
11g channel 10 -bgscan"
---------
"hostapd.conf"
---------
interface=wlan0
debug=1
ctrl_interface=/var/run/hostapd
ctrl_interface_group=wheel
ssid=freebsd-power
wpa=2
wpa_passphrase=MY_SWEET_SECRET
#wpa_key_mgmt=WPA-PSK
#wpa_pairwise=CCMP TKIP
wpa_pairwise=CCMP
hw_mode=g
wmm_enabled=1
#ieee80211n=1
beacon_int=1000
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
---------
And finally hostapd debug output:
---------
Configuration file: /etc/hostapd.conf
Line 2: DEPRECATED: 'debug' configuration variable is not used anymore
ctrl_interface_group=0 (from group name 'wheel')
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
Completing interface initialization
hostapd_setup_bss(hapd=0x801c5d000 (wlan0), first=1)
wlan0: Flushing old station entries
wlan0: Deauthenticate all stations
bsd_set_privacy: enabled=0
bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=0
bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=1
bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=2
bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=3
Using interface wlan0 with hwaddr 00:08:ca:e4:a3:96 and ssid "freebsd-power"
Deriving WPA PSK based on passphrase
SSID - hexdump_ascii(len=13):
66 72 65 65 62 73 64 2d 70 6f 77 65 72 freebsd-power
PSK (ASCII passphrase) - hexdump_ascii(len=24): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
bsd_set_ieee8021x: enabled=1
bsd_configure_wpa: enable WPA= 0x2
ioctl[SIOCS80211, op=7, val=5, arg_len=0]: Invalid argument
bsd_set_ieee8021x: Failed to enable WPA/802.1X
IEEE 802.1X initialization failed.
wlan0: Flushing old station entries
wlan0: Deauthenticate all stations
bsd_set_privacy: enabled=0
bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=0
bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=1
bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=2
bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=3
hostapd_free_hapd_data(wlan0)
bsd_set_ieee8021x: enabled=0
Interface initialization failed
wlan0: interface state UNINITIALIZED->DISABLED
wlan0: AP-DISABLED
wlan0: Unable to setup interface.
hostapd_interface_deinit_free(0x801c2c000)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x801c2c000)
wlan0: interface state DISABLED->DISABLED
hostapd_bss_deinit: deinit bss wlan0
wlan0: Flushing old station entries
wlan0: Deauthenticate all stations
bsd_set_privacy: enabled=0
bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=0
bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=1
bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=2
bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=3
wlan0: AP-DISABLED
hostapd_cleanup(hapd=0x801c5d000 (wlan0))
hostapd_free_hapd_data: Interface wlan0 wasn't started
hostapd_interface_deinit_free: driver=0x4789d0 drv_priv=0x801c66000 ->
hapd_deinit
hostapd_interface_free(0x801c2c000)
hostapd_interface_free: free hapd 0x801c5d000
hostapd_cleanup_iface(0x801c2c000)
hostapd_cleanup_iface_partial(0x801c2c000)
hostapd_cleanup_iface: free iface=0x801c2c000
---------
I don't know yet what is different between 11.0 and 11.1 regarding 802x.
Any help is appreciated.
Regards,
Sebastian Stroniewski-Wojtczak
_______________________________________________
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
