http://pasted.co/3664ad20
There it is. Nope, it's the log from the client which fails. On Sat, 2017-02-04 at 08:54 -0800, Adrian Chadd wrote: > hiya, > > hm! attachments are stripped. can you please put it up somewhere for > download? > > Is that log from the AP side? > > > > -adrian > > > On 4 February 2017 at 06:34, clutton <clut...@zoho.com> wrote: > > > > Hi list. > > > > The hosts are CURRENT both AP and client, after some time of usage > > client (my laptop) becomes deaf. > > tcpdump from AP shows that packets are received and transmitted > > back, > > but on client tcpdump doesn't show receiving. arping doesn't work > > too. > > ifconfig shows "status: associated" anyway. > > > > I don't have any wifi encryption, I use OPEN with IPSEC, but > > without > > IPSEC the situation is the same. > > > > What else, ifconfig down/up solves the issue, and with ifconfig -ht > > everything works well. Need more info - ask. > > > > The log attached is produced with: > > _ wlandebug input+scan+assoc+elemid+node+output+inact+roam+rate > > > > client's dmesg: > > ath0: <Atheros 5418> mem 0xdf3f0000-0xdf3fffff irq 17 at device 0.0 > > on > > pci2 > > ath0: [HT] enabling HT modes > > ath0: [HT] RTS aggregates limited to 8 KiB > > ath0: [HT] 2 RX streams; 2 TX streams > > ath0: AR5418 mac 12.10 RF5133 phy 8.1 > > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 > > > > P.S. I must be cursed, since I send few emails with debug > > attachment > > and none of them passed to list.
signature.asc
Description: This is a digitally signed message part
