Begin forwarded message:
Date: Sat, 7 Jan 2017 15:51:12 +0100
From: Orka Edison <orka.edi...@ovh.fr>
To: freebsd-hardw...@freebsd.org
Subject: BCM4312 802.11b/g LP-PHY' firmware problem
hi,
i have added a BCM4312 on my Dell Precision M4700 under WWAN port.
i try to do working it, but some else not working correctly...
=> my pciconf -lv :
siba_bwn0@pci0:2:0:0: class=0x028000 card=0x04b514e4
chip=0x431514e4 rev=0x01 hdr=0x00 vendor = 'Broadcom
Corporation' device = 'BCM4312 802.11b/g LP-PHY'
class = network
=> my loader.conf :
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
zfs_load="YES"
#### for nvidia driver ####
nvidia_load="YES"
linux_load="YES"
###########################
#### for bcm Wifi ####
if_bwn_load="YES"
bwn_v4_lp_ucode_load="YES"
hw.bwn.usedma=0
#if_bwi_load="YES"
ndis_load="YES"
wlan_load="YES"
#wlan_wep_load="YES"
wlan_ccmp_load="YES"
wlan_tkip_load="YES"
wlan_wmrr_load="YES"
firmware_load="YES"
#wlan_xauth_load="YES"
###########################
=> my rc.conf :
clear_tmp_enable="YES"
syslogd_flags="-ss"
sendmail_enable="NONE"
hostname="DellPrecision"
keymap="fr.iso.kbd"
#ifconfig_em0="DHCP"
#ifconfig_em0="DHCP"
#ifconfig_em0_ipv6="inet6 accept_rtadv"
moused_enable="YES"
ntpd_enable="YES"
powerd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
zfs_enable="YES"
#### enable gnome3 #####
#dbus_enable="YES"
#hald_enable="YES"
gdm_enable="YES"
gnome_enable="YES"
#########################
#### enable pf ####
#pf_enable="YES"
#pf_rules="/etc/pf.conf"
#pflog_enable="YES"
###################
#### enable WiFi #####
wlans_bwn0="wlan0"
ifconfig_wlan0="PSK DHCP"
=> the dmesg error log :
bwn0: ucode fw: ucode15
bwn0: firmware version (rev 478 patch 104 date 0x8701 time
0x657) bwn0: ucode fw: ucode15
bwn0: firmware version (rev 478 patch 104 date 0x8701 time
0x657) bwn0: incorrect CCK rate 61
bwn0: bwn_rxeof: dropped
bwn0: incorrect CCK rate 145
bwn0: bwn_rxeof: dropped
bwn0: incorrect CCK rate 145
bwn0: bwn_rxeof: dropped
bwn0: ucode fw: ucode15
bwn0: firmware version (rev 478 patch 104 date 0x8701 time
0x657) bwn0: ucode fw: ucode15
bwn0: firmware version (rev 478 patch 104 date 0x8701 time
0x657) bwn0: incorrect CCK rate 61
bwn0: bwn_rxeof: dropped
bwn0: incorrect CCK rate 145
bwn0: bwn_rxeof: dropped
bwn0: incorrect CCK rate 145
bwn0: bwn_rxeof: dropped
bwn0: incorrect CCK rate 61
bwn0: bwn_rxeof: dropped
bwn0: incorrect CCK rate 145
bwn0: bwn_rxeof: dropped
bwn0: incorrect CCK rate 145
bwn0: bwn_rxeof: dropped
bwn0: incorrect CCK rate 61
bwn0: bwn_rxeof: dropped
bwn0: incorrect CCK rate 145
bwn0: bwn_rxeof: dropped
=> my uname -a :
FreeBSD DellPrecision 11.0-RELEASE-p1 FreeBSD 11.0-RELEASE-p1
#0 r306420: Thu Sep 29 01:43:23 UTC 2016
r...@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
===================================================================================================
i use a wpa_supplicant.conf but can't enable wifi. the LED stay off
=> my ifconfig :
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric
0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether f0:1f:af:19:f8:c6 inet 192.168.1.68 netmask 0xffffff00
broadcast 192.168.1.255 nd6
options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media:
Ethernet autoselect (100baseTX <full-duplex>) status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500 ether 00:23:4d:4e:66:6b
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 7 (2442 MHz 11g)
regdomain FCC country US authmode OPEN privacy OFF txpower 30
bmiss 7 scanvalid 60 protmode CTS wme bintval 0
groups: wlan
=======================================================================================================
can you help me for to do working this card, because the default wifi
card are not reconnized by FreeBSD.
best regard,
Orka.
_______________________________________________
freebsd-hardw...@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to
"freebsd-hardware-unsubscr...@freebsd.org"
_______________________________________________
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
