hiya, it's totally possible some endian clean stuff is missing from the driver :(
-adrian On 4 December 2016 at 15:32, Oleksandr Tymoshenko <go...@bluezbox.com> wrote: > Hello, > > I am trying to get Intel Centrino Wireless-N 1000 working on one of > my ARM boards. iwn(4) recognizes it but I can’t associate it with > AP or get scan results. I am not sure whether it’s an iwn on ARM problem > or this card in general. I’d appreciate any hints on how to debug this > issue. > > My test script: > sysctl dev.iwn.0.debug=0x8007 > ifconfig wlan create wlandev iwn0 > wlandebug -i wlan0 +dumppkts+scan+debug > ifconfig wlan0 up scan > > Card’s dmesg: > > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: <Intel Centrino Wireless-N 1000> irq > 104 at device 0.0 on pci1 > Dec 4 23:25:25 jetson-tk1 kernel: pcib1: allocated initial memory window of > 0x13100000-0x131fffff > Dec 4 23:25:25 jetson-tk1 kernel: pcib1: allocated memory range > (0x13100000-0x13101fff) for rid 10 of iwn0 > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: Lazy allocation of 0x2000 bytes rid > 0x10 type 3 at 0x13100000 > Dec 4 23:25:25 jetson-tk1 kernel: ofw_pci mapdev: start 13100000, len 8192 > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: attempting to allocate 1 MSI vectors > (1 supported) > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: using IRQ 106 for MSI > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: MIMO 1T2R, BGS, address > 74:e5:0b:53:04:ec > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps > 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: 1T2R > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: 11ng MCS 20MHz > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: MCS 0-7: 6.5Mbps - 65Mbps > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: 11ng MCS 20MHz SGI > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: MCS 0-7: 7Mbps - 72Mbps > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: 11ng MCS 40MHz: > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: MCS 0-7: 13.5Mbps - 135Mbps > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: 11ng MCS 40MHz SGI: > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: MCS 0-7: 15Mbps - 150Mbps > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: bpf attached > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: bpf attached > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: Ethernet address: 74:e5:0b:53:04:ec > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: start running, 0 vaps running > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: ieee80211_start_locked: up parent > iwn0 > Dec 4 23:25:25 jetson-tk1 kernel: iwn0: iwn_read_firmware: ucode > rev=0x271f0501 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=0; qid 0 idx 0 flags 0 > type 1(UC_READY) len 36 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=1; qid 4 idx 0 flags 0 > type 90(IWN5000_CMD_WIMAX_COEX) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=2; qid 4 idx 1 flags 0 > type 176(IWN_CMD_PHY_CALIB) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3; qid 4 idx 2 flags 0 > type 101(IWN5000_CMD_CALIB_CONFIG) len 8 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=4; qid 0 idx 1 flags 0 > type 102(IWN5000_CMD_CALIB_RESULT) len 12 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=5; qid 0 idx 2 flags 0 > type 102(IWN5000_CMD_CALIB_RESULT) len 296 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=6; qid 0 idx 3 flags 0 > type 102(IWN5000_CMD_CALIB_RESULT) len 92 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=7; qid 0 idx 4 flags 0 > type 102(IWN5000_CMD_CALIB_RESULT) len 52 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=8; qid 0 idx 5 flags 0 > type 103(IWN5000_CMD_CALIB_COMPLETE) len 8 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=0; qid 0 idx 0 flags 0 > type 1(UC_READY) len 36 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=1; qid 4 idx 0 flags 0 > type 90(IWN5000_CMD_WIMAX_COEX) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=2; qid 4 idx 1 flags 0 > type 176(IWN_CMD_PHY_CALIB) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3; qid 4 idx 2 flags 0 > type 176(IWN_CMD_PHY_CALIB) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=4; qid 4 idx 3 flags 0 > type 176(IWN_CMD_PHY_CALIB) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=5; qid 4 idx 4 flags 0 > type 176(IWN_CMD_PHY_CALIB) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=6; qid 4 idx 5 flags 0 > type 176(IWN_CMD_PHY_CALIB) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_config: configuring valid TX chains 0x1 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=7; qid 4 idx 6 flags 0 > type 152(IWN5000_CMD_TX_ANT_CONFIG) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=8; qid 4 idx 7 flags 0 > type 155(IWN_CMD_BT_COEX) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_config: rxchainmask=0x3, nrxchains=2 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=9; qid 4 idx 8 flags 0 > type 16(IWN_CMD_RXON) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=10; qid 4 idx 9 flags > 0 type 24(ADD_NODE_DONE) len 8 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=11; qid 4 idx 10 flags > 0 type 78(IWN_CMD_LINK_QUALITY) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn5000_set_txpower: setting TX power; > rev=5 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=12; qid 4 idx 11 flags > 0 type 149(IWN_CMD_TXPOWER_DBM) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=13; qid 4 idx 12 flags > 0 type 164(IWN_CMD_SET_CRITICAL_TEMP) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=14; qid 4 idx 13 flags > 0 type 119(IWN_CMD_SET_POWER_MODE) len 4 > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: start running, 1 vaps running > Dec 4 23:25:25 jetson-tk1 kernel: iwn_newstate: INIT -> SCAN > > Than it just goes like this: > > Dec 4 23:25:25 jetson-tk1 kernel: sending scan command nchan=1 > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: iwn_notif_intr: cur=24; qid 4 idx > 17 flags 0 type 128(IWN_CMD_SCAN) len 8 > Dec 4 23:25:25 jetson-tk1 kernel: scan_curchan_task: waiting > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=25; qid 0 idx 8 flags > 0 type 130(START_SCAN) len 24 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: scanning channel 11 status > 1 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=26; qid 0 idx 9 flags > 0 type 131(IWN_CMD_SCAN_RESULTS) len 20 > Dec 4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=27; qid 0 idx 10 flags > 0 type 132(STOP_SCAN) len 16 > Dec 4 23:25:25 jetson-tk1 kernel: scan finished nchan=1 status=1 chan=11 > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: ieee80211_swscan_scan_next: called > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: scan_curchan_task: loop start; > scandone=0 > Dec 4 23:25:25 jetson-tk1 kernel: wlan0: scan_curchan_task: chan 11g -> > 7g [active, dwell min 20ms max 200ms] > Dec 4 23:25:25 jetson-tk1 kernel: iwn_scan: ssid_len=0, ssid= > Dec 4 23:25:25 jetson-tk1 kernel: iwn_scan: chan 7 flags 0x1 rf_gain 0x28 > dsp_gain 0x6e active 33 passive 100 scan_svc_time 16879616 crc 0xffff > isactive=0 numssid=0 > > without any RX frames or scan results. > > Thank you > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org" _______________________________________________ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
