Thu, 22 Sep 2016 12:24:42 +0300 було написано Kevin Lo <ke...@freebsd.org>:
Hi,
So, the driver was fully tested. Thanks!
Can you set dev.rtwn.0.debug=0x829f for RTL8188CE to see how big
the problem is?
Hi Andriy,
First of all, THANK YOU! You're doing amazing work!
Second, I've done some testing on the following devices, downloading
FreeBSD-12.0-CURRENT-amd64-20160809-r303880-disc1.iso from
ftp.freebsd.org:
- ASUS USB-N10 NANO (RTL8188CUS):
rtwn0: <vendor 0x0b05 product 0x17ba, class 0/0, rev 2.00/2.00, addr
3> on usbus0
rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
- TP-Link TL-WN725N v2 (RTL8188EU):
rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 4> on
usbus0
rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R
- D-Link DWA-131 (RTL8192CU):
rtwn0: <vendor 0x2001 product 0x330d, class 0/0, rev 2.00/2.00, addr
3> on usbus0
rtwn0: MAC/BB RTL8192CU, RF 6052 2T2R
- TP-Link Archer T4U (RTL8812AU):
rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 7> on
usbus0
rtwn0: MAC/BB RTL8812AU, RF 6052 2T2R
- D-Link DWA-171 rev A1 (RTL8821AU):
rtwn0: <802.11n WLAN Adapter> on usbus0
rtwn0: MAC/BB RTL8821AU, RF 6052 1T1R
- RTL8188CE mini pcie:
rtwn0: <Realtek RTL8188CE> port 0xd000-0xd0ff mem
0x90800000-0x90803fff irq 17 at device 0.0 on pci1
rtwn0: r92ce_attach: warning: hardware crypto enabled
rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R
All seems to be ok, except RTL8188CE PCIe adapter doesn't work:
rtwn0: r92ce_post_init: warning: net80211 ratectl is used
rtwn0: device timeout
Kevin
On Mon, Sep 19, 2016 at 04:26:38PM +0300, Andriy Voskoboinyk wrote:
Thu, 01 Sep 2016 19:29:03 +0300 було написано Andriy Voskoboinyk
<a...@freebsd.org>:
Now it resides on https://github.com/s3erios/freebsd-rtwn (integrated
into src tree, so it can be built with 'make buildkernel' / 'make
buildworld').
This the last stage; once all reported issues will be resolved, I'm
going to merge it into HEAD.
> Hi everyone,
>
> rtwn(4), urtwn(4) and urtwm (from previous emails) drivers were merged
> into a
> single rtwn driver (plus rtwn_usb / rtwn_pci device glue); the code is
> available on https://github.com/s3erios/rtwn repository. Among
bugfixes /
> code deduplication, there some new features too:
>
> 1) multi-vap support (one any wireless interface + one STA interface +
> any number of monitor mode interfaces).
> 2) few new sysctls:
> * dev.rtwn.#.crypto - controls how to use hardware crypto
acceleration
> * dev.rtwn.#.ratectl_selected
> * dev.rtwn.#.ratectl - selects current 'rate control' algorithm
> (currently only 'none' and 'net80211' are supported; RTL8192CE needs
> testing
> with the last).
> 3) (incomplete) power management support for RTL8188EU (requires
> firmware).
> 4) Short Guard Interval support.
>
> It's known to work with RTL8188CUS, RTL8188EU and RTL8821AU; however,
> it was never tested with RTL8192CE or RTL8812AU.
>
> How-to-build:
> 1) download / checkout the repository.
> 2) apply 'patch-usbdevs.diff' against '/usr/src'
> 3) build and install rtwn module:
> cd $repository/sys/modules/rtwn && make && make install
> 4) build and install rtwn_usb/rtwn_pci:
> cd ../rtwn_usb && make && make install
> cd ../rtwn_pci && make && make install
> 5) unload previous && load current drivers:
> kldunload if_urtwn if_rtwn
> kldload /boot/modules/if_rtwn.ko /boot/modules/if_rtwn_usb.ko
> /boot/modules/if_rtwn_pci.ko
> 6) Use.
_______________________________________________
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to
"freebsd-wireless-unsubscr...@freebsd.org"
_______________________________________________
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
