Hi!
ok, how'd you build things? a module, or in the kernel?
You need to (a) build it using 'make buildkernel / make installkernel'
and (b) ensure ATH_ENABLE_11N is in your kernel configuration.
The GPIO bits are a bit odd - let me check the other chipset drivers.
Can you compile the tools in src/tools/tools/ath/ - then run this:
ath_prom_dump -i ath0 -d /tmp/ath.dump
ath_ee_9300_print /tmp/ath.dump > /tmp/ath.txt
then email the contents of ath.txt . It'll include the GPIO pin id.
Thanks!
-adrian
On 18 December 2014 at 11:53, Anthony Jenkins <scoobi_...@yahoo.com> wrote:
> The attached patch seems to get my rfkill GPIO working. It seems
> ar9300_enable_rf_kill() is never called. I added a call to it after
> ath_hal_enable_rfkill(), but this is probably not the right place (I see it
> called several times while the interface is up).
>
> I also found several spots in the GPIO handling code which give up if the
> GPIO pin is 8, 9, 11 or greater than 13; my rfkill GPIO pin is 11 (0x0B). I
> commented these out:
>
>
> if ((gpio == AR9382_GPIO_PIN_8_RESERVED) ||
> (gpio == AR9382_GPIO_PIN_11_RESERVED) ||
> (gpio == AR9382_GPIO_9_INPUT_ONLY))
> {
> return AH_FALSE;
> }
>
>
>
> if ((gpio == AR9382_GPIO_PIN_8_RESERVED) ||
> (gpio == AR9382_GPIO_PIN_11_RESERVED) ||
> (gpio > AR9382_MAX_GPIO_INPUT_PIN_NUM))
> {
> return;
> }
>
>
> Haven't narrowed down which is responsible for me being able to send this
> email using my AR9565. Also I'm getting flooded with these messages since
> moving ath & wlan out of the kernel...my patch broke something, no?
>
> ath0: ath_edma_rxfifo_alloc: Q1: alloc failed: i=0, nbufs=128?
> ath0: ath_edma_rxbuf_alloc: nothing on rxbuf?!
> ath0: ath_edma_rxfifo_alloc: Q1: alloc failed: i=1, nbufs=128?
> ath0: ath_edma_rxbuf_alloc: nothing on rxbuf?!
> ath0: ath_edma_rxfifo_alloc: Q1: alloc failed: i=0, nbufs=128?
> ath0: ath_edma_rxbuf_alloc: nothing on rxbuf?!
> ath0: ath_edma_rxfifo_alloc: Q1: alloc failed: i=1, nbufs=128?
> ath0: ath_edma_rxbuf_alloc: nothing on rxbuf?!
> ath0: ath_edma_rxfifo_alloc: Q1: alloc failed: i=0, nbufs=128?
>
>
> Anthony
> ________________________________
> From: Adrian Chadd <adr...@freebsd.org>
> To: Anthony Jenkins <scoobi_...@yahoo.com>
> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>
> Sent: Monday, July 29, 2013 10:44 AM
> Subject: Re: Atheros AR9565 detected, not working
>
>
> Cool, thanks.
>
> Please make sure you post patches for all the things you fix. I'd love
> to see this kind of thing work out of the box. :)
>
>
> -adrian
>
> On 29 July 2013 07:36, Anthony Jenkins <scoobi_...@yahoo.com> wrote:
>> Thanks Adrian,
>>
>> I've managed to fix a few things on this laptop, the remaining stuff is
>> BIOS/ACPI related. acpi_hp(4) isn't working, has something to do with WMI.
>> Hoping if I fix the ACPI stuff I can
> have me AR9565 working. I'll poke
>> around and report back; the RFKill suggestion is a good place to start
>> looking.
>>
>> Thanks,
>> Anthony
>>
>>
>> On 07/29/13 10:30, Adrian Chadd wrote:
>>>
>>> Hm, maybe rfkill is set?
>>>
>>> The AR9565 is supported. I have the reference NICs from Atheros; they
>>> work just fine.
>>>
>>> It may be some kind of ACPI setting to enable/disable RFKill so the
>>> radio side is actually enabled.
>>>
>>> I'm sorry, I don't have much more than that to offer without having
>>> the laptop here.
>>>
>>> If someone's willing to send me one, I'll get 10 + wireless working on
>>> it and then hand it over to ixsystems to join the 'stuff we really
>>> should get pcbsd running smoothly on' pile. They're about $500 off of
>>>
> amazon.com.
>>>
>>> Thanks,
>>>
>>>
>>>
>>> -adrian
>>>
>>> On 29 July 2013 07:21, Anthony Jenkins <scoobi_...@yahoo.com> wrote:
>>>>
>>>> I just got an HP ENVY Sleekbook 6z-1100 laptop hoping it came with a
>>>> FreeBSD-supported wireless NIC. It has an Atheros AR9565 and looking at
>>>> the
>>>> logs it _seems_ like it should be working, but I get no network traffic.
>>>> I
>>>> haven't started the Atheros debugging procedure yet, save to compile in
>>>> option AH_DEBUG and move ath(4) out of the kernel & to a module to
>>>> facilitate changes. Works (of course) in Win8 which came with laptop.
>>>> Wireless enabled LED is amber (disabled) in FreeBSD, goes from amber
> to
>>>> white (enabled) when I boot the Win8 HDD.
>>>>
>>>> Here's various logs and misc. system info. What should I try next?
>>>> Thanks
>>>> in advance!
>>>>
>>>> [root@laptop /usr/src]# uname -a n
>>>> FreeBSD laptop.qtchat.org 10.0-CURRENT FreeBSD 10.0-CURRENT #0: Sat Jul
>>>> 27
>>>> 23:45:30 EDT 2013 r...@laptop.qtchat.org:/usr/obj/usr/src/sys/MYKERNEL
>>>> amd64
>>>>
>>>> [root@laptop /usr/src]# dmesg
>>>> Copyright (c) 1992-2013 The FreeBSD Project.
>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>>> The Regents
> of the University of California. All rights reserved.
>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>>> FreeBSD 10.0-CURRENT #0: Sat Jul 27 23:45:30 EDT 2013
>>>> r...@laptop.qtchat.org:/usr/obj/usr/src/sys/MYKERNEL amd64
>>>> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
>>>> module_register: module pci/xhci already exists!
>>>> Module pci/xhci failed to register: 17
>>>> CPU: AMD A10-4655M APU with Radeon(tm) HD Graphics (1996.31-MHz
>>>> K8-class
>>>> CPU)
>>>> Origin = "AuthenticAMD" Id = 0x610f01 Family = 0x15 Model = 0x10
>>>> Stepping = 1
>>>>
>>>>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>>>>
>>>> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
>>>> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>>>> AMD
>>>>
>>>> Features2=0x1abbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,<b17>,NodeId,TBM,<b23>,<b24>>
>>>> Standard Extended Features=0x8<BMI1>
>>>> TSC: P-state invariant, performance statistics
>>>> real memory = 17179869184 (16384 MB)
>>>> avail memory = 15463530496 (14747 MB)
>>>> Event timer "LAPIC" quality 400
>>>> ACPI APIC Table: <HPQOEM 18DE
>>
>>>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>>>> FreeBSD/SMP: 1 package(s) x 4 core(s)
>>>> cpu0 (BSP): APIC ID: 16
>>>> cpu1 (AP): APIC ID: 17
>>>> cpu2 (AP): APIC ID: 18
>>>> cpu3 (AP): APIC ID: 19
>>>> ioapic0: Changing APIC ID to 4
>>>> ioapic0 <Version 2.1> irqs 0-23 on motherboard
>>>> kbd1 at kbdmux0
>>>> acpi0: <HPQOEM SLIC-MPC> on motherboard
>>>> acpi0: Power Button (fixed)
>>>> cpu0: <ACPI CPU> on acpi0
>>>> cpu1: <ACPI CPU> on acpi0
>>>> cpu2: <ACPI CPU> on acpi0
>>>> cpu3: <ACPI CPU> on acpi0
>>>> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8
>>>> on
>>>> acpi0
>>>> Timecounter "HPET" frequency 14318180 Hz quality
> 950
>>>> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>>>> Event timer "RTC" frequency 32768 Hz quality 0
>>>> attimer0: <AT timer> port 0x40-0x43 on acpi0
>>>> Timecounter "i8254" frequency 1193182 Hz quality 0
>>>> Event timer "i8254" frequency 1193182 Hz quality 100
>>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>>>> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>>>> acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 iomem
>>>> 0xff000000-0xff000fff on acpi0
>>>> acpi_button0: <Power Button> on acpi0
>>>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>>>> pci0: <ACPI PCI bus> on pcib0
>>>> vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
>>>> 0xe0000000-0xefffffff,0xf0300000-0xf033ffff
> irq 17 at device 1.0 on pci0
>>>> acpi_video0: <ACPI video extension> on vgapci0
>>>> hdac0: <ATI (0x9902) HDA Controller> mem 0xf0344000-0xf0347fff irq 18 at
>>>> device 1.1 on pci0
>>>> hdac0: hdac_get_capabilities: Invalid corb size (0); assuming 256.
>>>> hdac0: hdac_get_capabilities: Invalid rirb size (0); assuming 256.
>>>> pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>>>> pci1: <ACPI PCI bus> on pcib1
>>>> pci1: <unknown> at device 0.0 (no driver attached)
>>>> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
>>>> 0x2000-0x20ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at
>>>> device 0.2 on pci1
>>>> re0: Using 1 MSI-X message
>>>> re0: turning off MSI enable bit.
>>>> re0: ASPM disabled
>>>> re0: Chip rev.
> 0x48800000
>>>> re0: MAC rev. 0x00000000
>>>> miibus0: <MII bus> on re0
>>>> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on
>>>> miibus0
>>>> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
>>>> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
>>>> 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
>>>> re0: Ethernet address: 6c:3b:e5:81:21:f0
>>>> pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
>>>> pci2: <ACPI PCI bus> on pcib2
>>>> ath0: <Qualcomm Atheros AR9565> mem 0xf0100000-0xf017ffff irq 17 at
>>>> device
>>>> 0.0 on pci2
>>>> ar9300_set_stub_functions: setting stub functions
>>>> ar9300_set_stub_functions: setting stub functions
>>>> ar9300_attach: calling
> ar9300_hw_attach
>>>> ar9300_hw_attach: calling ar9300_eeprom_attach
>>>> ar9300_flash_map: unimplemented for now
>>>> Restoring Cal data from DRAM
>>>> Restoring Cal data from EEPROM
>>>> Restoring Cal data from Flash
>>>> Restoring Cal data from Flash
>>>> Restoring Cal data from OTP
>>>> ar9300_hw_attach: ar9300_eeprom_attach returned 0
>>>> ar9300_fill_capability_info: (MCI) MCI support = 1
>>>> ath0: RX status length: 48
>>>> ath0: RX buffer size: 4096
>>>> ath0: TX descriptor length: 128
>>>> ath0: TX status length: 36
>>>> ath0: TX buffers per descriptor: 4
>>>> ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
>>>> ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
>>>> ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128
> entries
>>>> ath0: [HT] enabling HT modes
>>>> ath0: [HT] enabling short-GI in 20MHz mode
>>>> ath0: [HT] 1 stream STBC receive enabled
>>>> ath0: [HT] 1 RX streams; 1 TX streams
>>>> ath0: AR9565 mac 704.0 RF5110 phy 526.12
>>>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
>>>> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf0348000-0xf0349fff irq
>>>> 18
>>>> at device 16.0 on pci0
>>>> usbus0: waiting for BIOS to give up control
>>>> xhci0: 32 byte context size.
>>>> usbus0 on xhci0
>>>> ahci0: <AMD Hudson-2 AHCI SATA controller> port
>>>> 0x3118-0x311f,0x3124-0x3127,0x3110-0x3117,0x3120-0x3123,0x3100-0x310f mem
>>>> 0xf034e000-0xf034e7ff irq 19 at device 17.0 on pci0
>>>> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported
>>>> ahcich0:
> <AHCI channel> at channel 0 on ahci0
>>>> ohci0: <OHCI (generic) USB controller> mem 0xf034d000-0xf034dfff irq 18
>>>> at
>>>> device 18.0 on pci0
>>>> usbus1 on ohci0
>>>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf034c000-0xf034c0ff irq
>>>> 17
>>>> at device 18.2 on pci0
>>>> usbus2: EHCI version 1.0
>>>> usbus2 on ehci0
>>>> ohci1: <OHCI (generic) USB controller> mem 0xf034b000-0xf034bfff irq 18
>>>> at
>>>> device 19.0 on pci0
>>>> usbus3 on ohci1
>>>> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf034a000-0xf034a0ff irq
>>>> 17
>>>> at device 19.2 on pci0
>>>> usbus4: EHCI version 1.0
>>>> usbus4 on ehci1
>>>> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
>>>> hdac1:
> <Generic (0x780d1022) HDA Controller> mem 0xf0340000-0xf0343fff
>>>> irq
>>>> 16 at device 20.2 on pci0
>>>> isab0: <PCI-ISA bridge> at device 20.3 on pci0
>>>> isa0: <ISA bus> on isab0
>>>> pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>>>> pci3: <ACPI PCI bus> on pcib3
>>>> acpi_lid0: <Control Method Lid Switch> on acpi0
>>>> acpi_tz0: <Thermal Zone> on acpi0
>>>> acpi_tz0: _CRT value is absurd, ignored (226.8C)
>>>> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>>>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>>>> kbd0 at atkbd0
>>>> atkbd0: [GIANT-LOCKED]
>>>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>>>> psm0: [GIANT-LOCKED]
>>>> psm0: model Synaptics Touchpad, device ID 0
>>>>
> battery0: <ACPI Control Method Battery> on acpi0
>>>> acpi_acad0: <AC Adapter> on acpi0
>>>> sc0: <System console> at flags 0x100 on isa0
>>>> sc0: VGA <16 virtual consoles, flags=0x300>
>>>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>>>> ctl: CAM Target Layer loaded
>>>> acpi_throttle0: <ACPI CPU Throttling> on cpu0
>>>> acpi_throttle1: <ACPI CPU Throttling> on cpu1
>>>> acpi_throttle1: failed to attach P_CNT
>>>> device_attach: acpi_throttle1 attach returned 6
>>>> acpi_throttle2: <ACPI CPU Throttling> on cpu2
>>>> acpi_throttle2: failed to attach P_CNT
>>>> device_attach: acpi_throttle2 attach returned 6
>>>> acpi_throttle3: <ACPI CPU Throttling> on cpu3
>>>> acpi_throttle3: failed to attach P_CNT
>>>>
> device_attach: acpi_throttle3 attach returned 6
>>>> ZFS filesystem version: 5
>>>> ZFS storage pool version: features support (5000)
>>>> Timecounters tick every 1.000 msec
>>>> hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
>>>> hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
>>>> pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
>>>> hdacc1: <IDT 92HD91BXX HDA CODEC> at cad 0 on hdac1
>>>> hdaa1: <IDT 92HD91BXX Audio Function Group> at nid 1 on hdacc1
>>>> pcm1: <IDT 92HD91BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 12 on hdaa1
>>>> pcm2: <IDT 92HD91BXX (Analog Mic)> at nid 17 on hdaa1
>>>> usbus0: 5.0Gbps Super Speed USB v3.0
>>>> usbus1: 12Mbps Full Speed USB v1.0
>>>> usbus2: 480Mbps High Speed USB v2.0
>>>> usbus3: 12Mbps Full Speed USB
> v1.0
>>>> usbus4: 480Mbps High Speed USB v2.0
>>>> ugen3.1: <AMD> at usbus3
>>>> uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>>>> ugen2.1: <AMD> at usbus2
>>>> uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>>>> ugen1.1: <AMD> at usbus1
>>>> uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>>>> ugen0.1: <0x1022> at usbus0
>>>> uhub3: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>>>> ugen4.1: <AMD> at usbus4
>>>> uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>>>> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>>>> ada0: <Samsung SSD 840 Series DXT06B0Q> ATA-9 SATA 3.x device
>>>> ada0: 600.000MB/s transfers (SATA 3.x,
> UDMA6, PIO 8192bytes)
>>>> ada0: Command Queueing enabled
>>>> ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
>>>> ada0: Previously was known as ad4
>>>> SMP: AP CPU #3 Launched!
>>>> SMP: AP CPU #1 Launched!
>>>> SMP: AP CPU #2 Launched!
>>>> Timecounter "TSC" frequency 1996309068 Hz quality 1000
>>>> Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
>>>> uhub0: 5 ports with 5 removable, self powered
>>>> uhub2: 5 ports with 5 removable, self powered
>>>> ACPI Error: No handler for Region [RCM0] (0xfffffe0026ac6b00)
>>>> [SystemCMOS]
>>>> (20130626/evregion-178)
>>>> ACPI Error: Region SystemCMOS (ID=5) has no handler
>>>> (20130626/exfldio-320)
>>>> ACPI Error: Method parse/execution failed [\134_SB_.WMID.ESDT] (Node
>>>> 0xfffffe0026adac40),
> AE_NOT_EXIST (20130626/psparse-553)
>>>> ACPI Error: Method parse/execution failed [\134_SB_.PCI0.LPC0.EC0_._Q42]
>>>> (Node 0xfffffe0026ae8340), AE_NOT_EXIST (20130626/psparse-553)
>>>> acpi_ec0: evaluation of query method _Q42 failed: AE_NOT_EXIST
>>>> uhub3: 4 ports with 4 removable, self powered
>>>> Root mount waiting for: usbus4 usbus2
>>>> uhub1: 5 ports with 5 removable, self powered
>>>> uhub4: 5 ports with 5 removable, self powered
>>>> Root mount waiting for: usbus4 usbus2
>>>> ugen2.2: <Ralink> at usbus2
>>>> ugen4.2: <SuYin> at usbus4
>>>> Trying to mount root from zfs:sys []...
>>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>>> ugen3.2: <vendor 0x0cf3> at usbus3
>>>>
> ar9300_Stub_GetCTSTimeout: called
>>>> ar9300_Stub_GetCTSTimeout: called
>>>> ar9300_Stub_GetAntennaSwitch: called
>>>> ar9300_Stub_GetAntennaSwitch: called
>>>> wlan1: Ethernet address: 20:68:9d:c5:76:8d
>>>> run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2
>>>> run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address
>>>> 1c:bd:b9:8c:9d:71
>>>> ubt0: <vendor 0x0cf3 product 0x311f, class 224/1, rev 1.10/0.01, addr 2>
>>>> on
>>>> usbus3
>>>> wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
>>>> run0: firmware RT3071 ver. 0.236 loaded
>>>> WARNING: attempt to domain_add(bluetooth) after domainfinalize()
>>>> WARNING: attempt to domain_add(netgraph) after domainfinalize()
>>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>>> can't
> evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>>> WARNING pid 2654 (python2.7): ioctl sign-extension ioctl ffffffff80087467
>>>> WARNING pid 2655 (python2.7): ioctl sign-extension ioctl ffffffff80087467
>>>> WARNING pid 2656 (python2.7): ioctl sign-extension ioctl ffffffff80087467
>>>> wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
>>>> run0: firmware RT3071 ver. 0.236 loaded
>>>> wlan0: link state changed to UP
>>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>>> uhub3: at usbus0, port 1, addr 1 (disconnected)
>>>> uhub2: at usbus1, port 1, addr 1 (disconnected)
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller
> halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> uhub1: at usbus2, port 1, addr 1 (disconnected)
>>>> ugen2.2: <Ralink> at usbus2 (disconnected)
>>>> run0: at uhub1, port 1, addr 2 (disconnected)
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller
> halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> wlan0: link state changed to DOWN
>>>> uhub0: at usbus3, port 1, addr 1 (disconnected)
>>>> ugen3.2: <vendor 0x0cf3> at usbus3 (disconnected)
>>>> ubt0: at uhub0, port 4, addr 2 (disconnected)
>>>> xhci_interrupt: host controller halted
>>>> xhci_interrupt: host controller halted
>>>> uhub4: at usbus4, port 1, addr 1 (disconnected)
>>>> ugen4.2: <SuYin> at usbus4 (disconnected)
>>>> ACPI Error: No handler for Region [RCM0] (0xfffffe0026ac6b00)
>>>> [SystemCMOS]
>>>> (20130626/evregion-178)
>>>> ACPI Error: Region SystemCMOS (ID=5)
> has no handler
>>>> (20130626/exfldio-320)
>>>> ACPI Error: Method parse/execution failed [\134_SB_.WMID.ESDT] (Node
>>>> 0xfffffe0026adac40), AE_NOT_EXIST (20130626/psparse-553)
>>>> ACPI Error: Method parse/execution failed [\134_PTS] (Node
>>>> 0xfffffe0026ab4c80), AE_NOT_EXIST (20130626/psparse-553)
>>>> acpi0: AcpiEnterSleepStatePrep failed - AE_NOT_EXIST
>>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>>> xhci0: 32 byte context size.
>>>> uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>>>> uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>>>> uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>>>> uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>>>> uhub4: <AMD OHCI root
> HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>>>> uhub0: 4 ports with 4 removable, self powered
>>>> uhub4: 5 ports with 5 removable, self powered
>>>> uhub3: 5 ports with 5 removable, self powered
>>>> uhub1: 5 ports with 5 removable, self powered
>>>> uhub2: 5 ports with 5 removable, self powered
>>>> ugen2.2: <Ralink> at usbus2
>>>> run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2
>>>> ugen4.2: <SuYin> at usbus4
>>>> run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address
>>>> 1c:bd:b9:8c:9d:71
>>>> wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
>>>> run0: firmware RT3071 ver. 0.236 loaded
>>>> ugen3.2: <vendor 0x0cf3> at usbus3
>>>> ubt0: <vendor 0x0cf3 product 0x311f, class 224/1, rev 1.10/0.01, addr 2>
>>>>
> on
>>>> usbus3
>>>> wlan0: link state changed to UP
>>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>>>
>>>> [root@laptop /usr/src]# cat /etc/rc.conf
>>>> wlans_run0="wlan0"
>>>> wlans_ath0="wlan1"
>>>> ifconfig_wlan0="DHCP WPA"
>>>> ...
>>>>
>>>> [root@laptop /usr/src]# ifconfig -a
>>>> ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
>>>> ether 20:68:9d:c5:76:8d
>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>> status: no carrier
>>>> wlan1:
> flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>>> ether 20:68:9d:c5:76:8d
>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>> status: no carrier
>>>> ssid "" channel 1 (2412 MHz 11b)
>>>> regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss
>>>> 7
>>>> scanvalid 60 wme burst bintval 0
>>>> ...
>>>>
>>>> [root@laptop /usr/src]# /etc/rc.d/netif start ath0
>>>> Starting Network: ath0.
>>>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>>>>
> 2290
>>>> ether 20:68:9d:c5:76:8d
>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>> media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
>>>> status: associated
>>>> Additional inet routing options: ignore ICMP redirect=YES log ICMP
>>>> redirect=YES.
>>>>
>>>> [root@laptop /usr/src]# for iface in ath0 wlan1; do ifconfig ${iface};
>>>> done
>>>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>>>> 2290
>>>> ether 20:68:9d:c5:76:8d
>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>> media: IEEE 802.11 Wireless Ethernet autoselect mode
> 11g
>>>> status: associated
>>>> wlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>>>> 1500
>>>> ether 20:68:9d:c5:76:8d
>>>> inet 67.215.65.145 netmask 0xff000000 broadcast 67.215.65.145
>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>> status: no carrier
>>>> ssid "" channel 2 (2417 MHz 11g)
>>>> regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss
>>>> 7
>>>> scanvalid 60 protmode CTS wme burst
>>>>
>>>> [root@laptop /usr/src]# dmesg
>>>> ...
>>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>>>
>>>>
>>>> --
>>>> Anthony Jenkins
>>>> _______________________________________________
>>>> freebsd-wireless@freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>> To unsubscribe, send any mail to
>>>> "freebsd-wireless-unsubscr...@freebsd.org"
>>
>>
>>
>> --
>> Anthony Jenkins
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
