Hi.
On 07.12.2013 22:21, Adrian Chadd wrote:
Here's some fixes from mav, shoehorned into the current driver framework.
Mav - where'd you get your changes from?
It was long ago. I would guess that from you. :)
http://people.freebsd.org/~adrian/iwn/20131207-iwn-6235-1.diff
This enables the 6235.
It now doesn't firmware panic upon startup. I've passed _no_ traffic
through it though - I don't have pigtails for the connectors on my
NIC. Sorry :(
I've added in mav's changes but I've done it by adding a new 6235
config / limits section rather than hacking up the existing 6000g2b
section. I don't know what effect it'll have on the existing NICs. So
I didn't want to change that behaviour.
This is against the latest -HEAD.
I've updated to the latest HEAD including only your patch and
immediately got firmware crash during boot:
firmware: 'iwn6000g2bfw' version 0: 460912 bytes loaded at
0xffffffff81a120c0
iwn0: iwn_intr: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x000019B6)
program counter = 0x00014DD0
source line = 0x000002E2
error data = 0x000000010000008C
branch link = 0x00014DC200014DC2
interrupt link = 0x0000CFE200000000
time = 26892
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=0 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=2 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
iwn0: iwn5000_post_alive: crystal calibration failed, error 35
iwn0: iwn_init_locked: could not initialize hardware, error 35
firmware: 'iwn6000g2bfw' version 0: 460912 bytes loaded at
0xffffffff81a120c0
iwn0: iwn_intr: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x000019B6)
program counter = 0x00014DD0
source line = 0x000002E2
error data = 0x000000010000008C
branch link = 0x00014DC200014DC2
interrupt link = 0x0000CFE200000000
time = 26907
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=0 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=2 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
iwn0: iwn5000_post_alive: crystal calibration failed, error 35
iwn0: iwn_init_locked: could not initialize hardware, error 35
Adding usual -ht40 option didn't change anything.
Then I switched from default 6000g2b firmware 17.168.5.2 to 18.168.6.1,
which I was using before. With -ht40 flag am able to connect and write
this letter. Without the flag card can't associate with AP:
Dec 9 10:43:37 mavbook wpa_supplicant[467]: wlan0: Authentication with
56:04:a6:d3:65:30 timed out.
Dec 9 10:43:37 mavbook wpa_supplicant[467]: wlan0:
CTRL-EVENT-DISCONNECTED bssid=56:04:a6:d3:65:30 reason=3 locally_generated=1
Dec 9 10:43:41 mavbook wpa_supplicant[467]: wlan0: Trying to associate
with 56:04:a6:d3:65:30 (SSID='mavhome5' freq=5180 MHz)
Dec 9 10:43:41 mavbook wpa_supplicant[467]: wlan0: Associated with
56:04:a6:d3:65:30
Dec 9 10:43:41 mavbook kernel: wlan0: link state changed to UP
Dec 9 10:43:41 mavbook dhclient[1313]: send_packet: No buffer space
available
Dec 9 10:43:42 mavbook wpa_supplicant[467]: wlan0:
CTRL-EVENT-DISCONNECTED bssid=56:04:a6:d3:65:30 reason=0
Dec 9 10:43:42 mavbook kernel: wlan0: link state changed to DOWN
Dec 9 10:43:45 mavbook dhclient[1313]: send_packet: Invalid argument
Dec 9 10:43:47 mavbook wpa_supplicant[467]: wlan0: Trying to associate
with 56:04:a6:d3:65:30 (SSID='mavhome5' freq=5180 MHz)
Dec 9 10:43:55 mavbook dhclient[1313]: send_packet: Network is down
Dec 9 10:43:57 mavbook wpa_supplicant[467]: wlan0: Authentication with
56:04:a6:d3:65:30 timed out.
Dec 9 10:43:57 mavbook wpa_supplicant[467]: wlan0:
CTRL-EVENT-DISCONNECTED bssid=56:04:a6:d3:65:30 reason=3 locally_generated=1
Dec 9 10:43:57 mavbook wpa_supplicant[467]: ioctl[SIOCS80211, op=20,
val=0, arg_len=7]: Can't assign requested address
Dec 9 10:43:59 mavbook dhclient[1313]: send_packet: Network is down
Should I collect any other debugging?
--
Alexander Motin
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
