> De : adrian.ch...@gmail.com [mailto:adrian.ch...@gmail.com] De la part > de Adrian Chadd > Envoyé : lundi 12 août 2013 19:31 > À : Cedric GROSS > Cc : freebsd-wireless@freebsd.org > Objet : Re: [iwn]Review Split 6 > > How do you create the second VAP, and what's it for? > #ifconfig wlan1 create wlandev iwn0
You could also have different mode, as #ifconfig wlan1 create wlanmode monitor wlandev iwn0 But again, as current version is not stable in normal operation, I haven't test it further. What could be interest of this ? Wifi relay, bridge or whatever usage of 2 wireless but only with 1 card. > > > -adrian > > On 12 August 2013 10:26, Cedric GROSS <c...@cgross.info> wrote: > > > >> De : adrian.ch...@gmail.com [mailto:adrian.ch...@gmail.com] De la > >> part de Adrian Chadd Envoyé : dimanche 11 août 2013 19:09 À : Cedric > >> GROSS Cc : freebsd-wireless@freebsd.org Objet : Re: [iwn]Review > Split > >> 6 > >> > >> On 11 August 2013 10:06, Cedric GROSS <c...@cgross.info> wrote: > >> > >> > U1 stand for unit 1. > >> > As you see, all function with this prefix will be call when > unit==1 > >> > within iwn_vap_create. > >> > > >> > As previously, I haven't investigate a lot this side. I plan to do > >> > so when standard run will be ok. > >> > >> Right. But what's going on, per se? Is it two separate NICs that > show > >> up as separate PCI devices? Or is this a hack so the firmware can > >> present two virtual NICs via the firmware API? > >> > > Not a separate PCI device but yes ability to create 2 wlan NIC : > > > > iwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > 2290 > > ether 60:36:dd:93:34:56 > > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng > > status: associated > > wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> > > metric 0 mtu 1500 > > ether 60:36:dd:93:34:56 > > inet 192.168.1.20 netmask 0xffffff00 broadcast 192.168.1.255 > > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > > media: IEEE 802.11 Wireless Ethernet MCS mode 11ng > > status: associated > > ssid WLenine channel 5 (2432 MHz 11g ht/20) bssid > 00:24:d4:97:80:20 > > country US authmode WPA2/802.11i privacy ON deftxkey UNDEF > > AES-CCM 2:128-bit txpower 15 bmiss 10 scanvalid 450 bgscan > > bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 > protmode CTS > > ampdulimit 64k -amsdutx amsdurx shortgi wme roaming MANUAL > > bintval > > 96 > > wlan1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > ether 60:36:dd:93:34:57 > > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > > status: no carrier > > ssid "" channel 5 (2432 MHz 11g ht/20) > > country US authmode OPEN privacy OFF txpower 15 bmiss 10 > > scanvalid > > 60 > > bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate > 64 > > protmode CTS ampdulimit 8k -amsdutx amsdurx shortgi wme > > bintval 0 > > _______________________________________________ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
