Hi all, I own a pcengines apu2e4 where bhyve passthru is working in general. Passing through the i210AT NICs works fine. However, I bought a Compex WLE200NX a/b/g/n miniPCI card which is based on the Qualcomm Atheros AR9280 chip I also want to pass through.
On the host I am running 12.2-RELEASE-p5. my loader.conf: hw.vmm.amdvi.enable=1 vmm_load="YES" pptdevs="1/0/0 3/0/0 4/0/0" hw.vmm.iommu.enable=1 pciconf -lv gives (relevant info; with igb0 used on the host): ppt0@pci0:1:0:0: class=0x028000 card=0x3099168c chip=0x002a168c rev=0x01 hdr=0x00 vendor = 'Qualcomm Atheros' device = 'AR928X Wireless Network Adapter (PCI-Express)' class = network igb0@pci0:2:0:0: class=0x020000 card=0x00008086 chip=0x157b8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'I210 Gigabit Network Connection' class = network subclass = ethernet ppt1@pci0:3:0:0: class=0x020000 card=0x00008086 chip=0x157b8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'I210 Gigabit Network Connection' class = network subclass = ethernet ppt2@pci0:4:0:0: class=0x020000 card=0x00008086 chip=0x157b8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'I210 Gigabit Network Connection' class = network subclass = ethernet in my vm-bhyve config I have passthru0="1/0/0" passthru1="4/0/0" which works nicely with the i210 adapter, but not with the wifi adapter. The wifi adapter also works when not passing through and using it via the host. In the VM (tried both the 12.2-RELEASE and 13.0-RC3), I have tried to load/unload various modules (or e.g. tried dev.ath.0.hal.force_full_reset=1), I do not get any connections, wifi scans/lists do not work. Other configurations result in "ath0: Device timeout" or in "wlan0: CTRL-EVENT-SCAN-FAILED ret=-1 retry=1". Any ideas how to resolve that? Regards, Robert _______________________________________________ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
