https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=245152
--- Comment #5 from rootl...@gmail.com ---
--- Comment #1 from Kubilay Kocak <ko...@freebsd.org> ---
Can you provide us with information (ideally on FreeBSD) on the relevant
Novatel device(s) that do work on FreeBSD, including which versions they
work on.
Good question. It appears that some older devices do. I don't have any other
devices nor working devices. Just from searching on the web I found that an
MiFi7730, from here:
https://forum.netgate.com/topic/143342/unable-to-properly-keep-usb-ethernet-interface-attached-on-verizon-jetpack-7730l/2
I also found the following on the OpenBSD listserv:
http://openbsd-archive.7691.n7.nabble.com/patch-for-Inseego-Novatel-MiFi-8800L-as-urndis0-td361099.html
Can you also elaborate on:
- "tethering on newer devices", as to whether that means you have an older
device that works, or worked in the past?
Just based on reports from the web. I only have the MiFi 8800/8000 - the
differences are the frequencies for the cell modem tied to the carrier.
- "enabling tethering is not get picked up", whaty does this specifically
mean
with regard to steps to reproduce, commands, outputs, errors,system
configuration to do so, etc (please provide as attachments)
1) Plug in the device via USB.
2) It should be picked up as an rndis device and assigned to ue0 (assuming no
other ue devices). [even using usbconfig -d ugen1.2 set_config 1 doesn't
result in an RNDIS ethernet interface being created]
Additionally, the following may be helpful
dmesg at plugin:
ugen1.2: <Novatel Wireless MiFi 8000> at usbus1
uhid2 on uhub0
uhid2: <HID Interface> on usbus1
usbconfig with the device attached:
# usbconfig
ugen1.1: <0x15ad EHCI root HUB> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen0.1: <0x15ad UHCI root HUB> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen0.2: <VMware VMware Virtual USB Mouse> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON (0mA)
ugen0.3: <VMware, Inc. VMware Virtual USB Hub> at usbus0, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen1.2: <Novatel Wireless MiFi 8000> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (224mA)
also
# usbconfig -d 1.2 dump_device_desc
ugen1.2: <Novatel Wireless MiFi 8000> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (224mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0310
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0009
idVendor = 0x1410
idProduct = 0xb022
bcdDevice = 0x0318
iManufacturer = 0x0001 <Novatel Wireless>
iProduct = 0x0002 <MiFi 8000>
iSerialNumber = 0x0003 <0123456789ABCDEF>
bNumConfigurations = 0x0001
--
You are receiving this mail because:
You are the assignee for the bug.
You are on the CC list for the bug.
_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
