On 4/1/19 3:31 PM, Florian Schulze wrote:
When you upgrade the kernel to 12, you also need to rebuild uarduno.ko
. Did you do that?
I reinstalled it via pkg and as I wrote in the original mail I had to
remove the old conflicting one in /boot/kernel to be able to load
uarduno. Also this doesn't explain why the Kindle doesn't connect anymore.
Both uarduno.ko and uether.ko load fine on startup, but besides one
mention of ugen3.4 for the arduino I don't see anything further in dmesg.
On 10.3 I see these two messages:
ugen3.4: <Arduino LLC> at usbus3
uarduno0: <Arduino LLC Arduino Leonardo, class 239/2, rev 2.00/1.00,
addr 4> on usbus3
And for the Kindle I see:
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 2a:c4:49:00:00:00
Neither shows up with 12.0.
Hi,
If you look through dmesg in 12.0, are there any mentions of USB_ERR ?
Can you check that all USB host controller drivers are present before
and after the upgrade?
What exact PCI models of xhci/ehci/ohci and uhci have you got?
pciconf -lv
It might be the host controller driver needs a quirk. See:
sysctl -a hw.usb | grep hci
--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
