On 1/24/2017 12:03 PM, Hans Petter Selasky wrote: > On 01/24/17 16:14, Mike Tancsa wrote: >> Perhaps some sort of USB quirk needs to be added ? Any ideas on how to >> get things working ? It fails on RELENG8, RELENG_10, and RELENG_11 in >> the same way. usbconfig dump_device_desc fails as its not able to get >> all the info. > > Hi, > > Try setting the UQ_NO_STRINGS quirk for this device and also verify that > the idVendor and idProduct is present in the apcaccess utility. Else it > will not attach!
Thanks! The quirk doesnt seem to make a difference to the app, but dump_device_desc works now # usbconfig -d ugen0.4 add_quirk UQ_NO_STRINGS # usbconfig -d 0.4 dump_device_desc ugen0.4: <American Power Conversion Back-UPS NS 650M1 FW929.a5 .D USB FWa5> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (2mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x051d idProduct = 0x0002 bcdDevice = 0x0090 iManufacturer = 0x0001 <American Power Conversion> iProduct = 0x0002 <Back-UPS NS 650M1 FW:929.a5 .D USB FW:a5 > iSerialNumber = 0x0003 <4B1630P12329 > bNumConfigurations = 0x0001 The daemon does attach to it, and it sort of reads some of the info (as before adding the quirk) # apcaccess APC : 001,033,0741 DATE : 2017-01-24 12:09:00 -0500 HOSTNAME : offsite2.sentex.ca VERSION : 3.14.14 (31 May 2016) freebsd UPSNAME : offsite2.sentex.ca CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2017-01-24 12:08:53 -0500 MODEL : STATUS : LINEV : 0.0 Volts LOADPCT : 0.0 Percent BCHARGE : 100.0 Percent TIMELEFT : 447.7 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Unknown LOTRANS : -1.0 Volts HITRANS : -1.0 Volts ALARMDEL : Always BATTV : 0.0 Volts NUMXFERS : 0 TONBATT : 0 Seconds CUMONBATT: 0 Seconds XOFFBATT : N/A SELFTEST : NO STATFLAG : 0x05000000 SERIALNO : BATTDATE : NOMINV : 0 Volts NOMBATTV : 0.0 Volts END APC : 2017-01-24 12:09:47 -0500 -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, m...@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ _______________________________________________ freebsd-usb@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
