On Fri, Feb 27, 2009 at 7:32 AM, Kim Culhan <w8hd...@gmail.com> wrote: > On Thu, Feb 26, 2009 at 5:40 PM, Mike Tancsa <m...@sentex.net> wrote: >> At 05:36 PM 2/26/2009, Kim Culhan wrote: >> >>> u3g0: <Data Interface> on usbus2 >>> u3g0: Found 4 ports. >>> umass0: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev >>> 1.10/0.00, addr 2> on usbus2 >>> umass0: SCSI over Bulk-Only; quirks = 0x0000 >>> umass0:1:0:-1: Attached to scbus1 >>> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 >>> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error >>> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition >>> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 >>> (probe0:umass-sim0:0:0:0): Medium not present >>> (probe0:umass-sim0:0:0:0): Unretryable error >>> da0 at umass-sim0 bus 0 target 0 lun 0 >>> da0: <Novatel MMC Storage 2.31> Removable Direct Access SCSI-2 device >>> da0: 1.000MB/s transfers >>> da0: Attempt to query device size failed: NOT READY, Medium not present >> >> If you do a >> camcontrol eject pass0 >> >> does /dev/cuaU* now show up ? >> >> I have a different Novatel unit where I have to do that to get it to work. >> >> umass0: <Novatel Wireless Novatel Wireless HSUPA Modem, class 0/0, rev >> 1.10/0.00, addr 2> on uhub0 >> vr0: vr_stop: Rx shutdown error >> vr0: Using force reset command. >> umass0: at uhub0 port 1 (addr 2) disconnected >> umass0: detached >> ucom0: <Novatel Wireless Novatel Wireless HSUPA Modem, class 0/0, rev >> 1.10/0.00, addr 2> on uhub0 >> ucom0: configured 2 serial ports (U0.%d) > > Yes, ejecting the 'cd0' appears to 'solve the problem' > > The order of events was: > > Boot the machine without u3g in the kernel > Insert the device > Issue the eject command: camcontrol eject pass0
Correction: Left this out the first time: kldload u3g > the following appears in /dev > > cuaU0.0 > cuaU0.0.init > cuaU0.0.lock > cuaU0.1 > cuaU0.1.init > cuaU0.1.lock > cuaU0.2 > cuaU0.2.init > cuaU0.2.lock > cuaU0.3 > cuaU0.3.init > cuaU0.3.lock > > Removing the device produces: > > u3g0: at ushub2, port 2, addr 2 (disconnected) > umass0: at ushub2, port 2, addr 2 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > ugen2.2: <Novatel Wireless Inc.> at usbus2 (disconnected) > > Reinserting the device produces: > > ugen2.2: <Novatel Wireless Inc.> at usbus2 > u3g0: <Data Interface> on usbus2 > u3g0: Found 4 ports. > umass0: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev > 1.10/0.00, addr 2> on usbus2 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:1:0:-1: Attached to scbus1 > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (probe0:umass-sim0:0:0:0): Medium not present > (probe0:umass-sim0:0:0:0): Unretryable error > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Novatel MMC Storage 2.31> Removable Direct Access SCSI-2 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > > remove it: > > u3g0: at ushub2, port 2, addr 2 (disconnected) > umass0: at ushub2, port 2, addr 2 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > ugen2.2: <Novatel Wireless Inc.> at usbus2 (disconnected) > > re-reattach it: > > ugen2.2: <Novatel Wireless Inc.> at usbus2 > u3g0: <Data Interface> on usbus2 > u3g0: Found 4 ports. > umass0: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev > 1.10/0.00, addr 2> on usbus2 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:1:0:-1: Attached to scbus1 > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (probe0:umass-sim0:0:0:0): Medium not present > (probe0:umass-sim0:0:0:0): Unretryable error > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Novatel MMC Storage 2.31> Removable Direct Access SCSI-2 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > > The U727 has a 'MicroSD' memory card slot which in this case > has a 4gb card installed. > > If the SD card never worked i wouldn't mind a bit :) > > -kim > _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
