instead of using usbconfig to add the quirks for my device i added them to umass2.c and usb2_devid.h. with the changes the device works without any problems. here's the dmesg output:
ugen3.2: <Meizu Electronics> at usbus3 umass0: <Meizu Electronics MiniPlayer, class 0/0, rev 2.00/1.00, addr 2> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x4400 umass0:7:0:-1: Attached to scbus7 da0 at umass-sim0 bus 0 target 0 lun 0 da0: < > Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 3864MB (7913472 512 byte sectors: 255H 63S/T 492C) it would be nice to see the changes make it into HEAD. cheers. alex Hans Petter Selasky schrieb am 2008-12-23: > On Tuesday 23 December 2008, Alexander Best wrote: > > hi there, > > could somebody tell me where i can find info about the quirk > > settings used > > in usbconfig (usb2) please? i had a look at usbconfig(8), but the > > manual > > doesn't contain any information concerning usb quirks. > Hi, > If you type: > usbconfig -h > You see that you have the following quirk commands available: > add_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk> > remove_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk> > dump_quirk_names > dump_device_quirks > Before you can use quirks you need to: > kldload usb2_quirk > --HPS
usb2meizu.patch
Description: Binary data
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
