Is it possible to add this device support ?

# udesc_dump /dev/ugen0
Standard Device Descriptor:
bLength            18
bDescriptorType    01
bcdUSB             0200
bDeviceClass       ef
bDeviceSubClass    01
bDeviceProtocol    01
bMaxPacketSize     16
idVendor           0930
idProduct          0d29
bcdDevice          0000
iManufacturer      1
iProduct           2
iSerialNumber      3
bNumConfigurations 1

Configuration 0:
      Standard Configuration Descriptor:
        bLength             9
        bDescriptorType     02
        wTotalLength        62
        bNumInterface       2
        bConfigurationValue 1
        iConfiguration      0
        bmAttributes        c0 (self-powered)
        bMaxPower           250 (500 mA)

      Standard Interface Descriptor:
        bLength            9
        bDescriptorType    04
        bInterfaceNumber   0
        bAlternateSetting  0
        bNumEndpoints      1
        bInterfaceClass    ef
        bInterfaceSubClass 01
        bInterfaceProtocol 01
        iInterface         0

              Descriptor:
                bLength            5
                bDescriptorType    24
                bDescriptorSubtype 01
              05 24 01 00 01

              Descriptor:
                bLength            4
                bDescriptorType    24
                bDescriptorSubtype 02
              04 24 02 00

              Descriptor:
                bLength            5
                bDescriptorType    24
                bDescriptorSubtype 02
              05 24 02 00 01

      Standard Endpoint Descriptor:
        bLength          7
        bDescriptorType  05
        bEndpointAddress 81 (in)
        bmAttributes     03 (Interrupt)
        wMaxPacketSize   8
        bInterval        1

      Standard Interface Descriptor:
        bLength            9
        bDescriptorType    04
        bInterfaceNumber   1
        bAlternateSetting  0
        bNumEndpoints      2
        bInterfaceClass    0a
        bInterfaceSubClass 00
        bInterfaceProtocol 00
        iInterface         0

      Standard Endpoint Descriptor:
        bLength          7
        bDescriptorType  05
        bEndpointAddress 82 (in)
        bmAttributes     02 (Bulk)
        wMaxPacketSize   64
        bInterval        0

      Standard Endpoint Descriptor:
        bLength          7
        bDescriptorType  05
        bEndpointAddress 03 (out)
        bmAttributes     02 (Bulk)
        wMaxPacketSize   64
        bInterval        0

Codes Representing Languages by the Device:
bLength          4
bDescriptorType  03
wLANGID[0]       0409

String (index 1): Toshiba Corporation

String (index 2): Toshiba RNDIS

String (index 3): e6461300-3205-0801-3804-0dd0120906ff


And when I put em to mass storage mode i got the following message in dmesg
umass0: <Generic Manufacturer (PROTOTYPE--Remember to change idVendor) Generic Mass Storage (PROTOTYPE--Remember to change idVendor), class 0/0, rev 2.00/0.00, addr 3> on uhub2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <  > Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 1964MB (4022272 512 byte sectors: 255H 63S/T 250C)


dmesg -a
FreeBSD fusion 7.0-BETA2 FreeBSD 7.0-BETA2 #11: Wed Nov 7 19:35:15 EET 2007 [EMAIL PROTECTED]:/.1/.bsdstaff/obj/.1/.bsdstaff/src/sys/ZLOVRED i386

Thanks in advance.



_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to