On Fri, Dec 07, 2007 at 10:36:58AM +0100, [EMAIL PROTECTED]@mgedv.net wrote:
> but when loading the ucom/ubsa stuff before umass, the device will
> not be recognised as /dev/cdX and show up as a communication device
> (ucom).
What the card needs (as seen in the linux code) is the correct
"poking" (aka: sending the right init stuff), to make it show the serial
ports. I've not looked at this on FreeBSD, just on OpenBSD. On OpenBSD
I hooked it up to the umsm(4) driver, (since that is the most simple
USB-serial driver we've got) and added the poking. It works, I can dial.
However, sometimes the device starts resetting itself, instead of dialing,
so what I have is not yet perfect ;)
felix
changes to OpenBSD umsm(4) driver:
Index: sys/dev/usb/umsm.c
===================================================================
RCS file: /cvs/src/sys/dev/usb/umsm.c,v
retrieving revision 1.16
diff -u -r1.16 umsm.c
--- sys/dev/usb/umsm.c 19 Jun 2007 23:59:27 -0000 1.16
+++ sys/dev/usb/umsm.c 8 Sep 2007 19:50:44 -0000
@@ -58,6 +58,7 @@
{ USB_VENDOR_AIRPRIME, USB_PRODUCT_AIRPRIME_PC5220 },
{ USB_VENDOR_DELL, USB_PRODUCT_DELL_W5500 },
{ USB_VENDOR_KYOCERA2, USB_PRODUCT_KYOCERA2_KPC650 },
+ { USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_E220 },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_EXPRESSCARD },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_MERLINV620 },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_S720 },
@@ -123,6 +124,25 @@
devinfop = usbd_devinfo_alloc(uaa->device, 0);
printf("\n%s: %s\n", sc->sc_dev.dv_xname, devinfop);
usbd_devinfo_free(devinfop);
+
+ if(uaa->product == USB_PRODUCT_HUAWEI_E220) {
+ usb_device_request_t req;
+ usbd_status err;
+
+ req.bmRequestType = UT_WRITE_DEVICE;
+ req.bRequest = UR_SET_FEATURE;
+ USETW(req.wValue, 1);
+ USETW(req.wIndex, 0);
+ USETW(req.wLength, 0);
+ err = usbd_do_request(sc->sc_udev, &req, 0);
+
+ if (err) {
+ printf("%s: failed to initialize device ",
+ sc->sc_dev.dv_xname);
+ sc->sc_dying = 1;
+ return;
+ }
+ }
if (usbd_set_config_index(sc->sc_udev, UMSM_CONFIG_NO, 1) != 0) {
printf("%s: could not set configuration no\n",
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
