Hello Mark,
On Wed, 28 Jun 2017 20:52:17 -0700
Mark Millard <mar...@dsl-only.net> wrote:
> On 2017-Jun-28, at 7:44 PM, Mark Millard <mar...@dsl-only.net> wrote:
>
> > Is the below a BSDL vs. GPL DTS issue?
> >
> > In my attempt to build sysutils/u-boot-pine64 I got:
> >
> > OBJCOPY u-boot.srec
> > OBJCOPY u-boot-nodtb.bin
> > start=$(aarch64-none-elf-nm u-boot | grep __rel_dyn_start | cut -f 1 -d '
> > '); end=$(aarch64-none-elf-nm u-boot | grep __rel_dyn_end | cut -f 1 -d '
> > '); tools/relocate-rela u-boot-nodtb.bin 0x4a000000 $start $end
> > SYM u-boot.sym
> > DTC arch/arm/dts/pine64_plus.dtb
> > Error at arch/arm/dts/.pine64_plus.dtb.dts.tmp:533:27: Expected unit address
> > gic: interrupt-controller@{
> > ^
> > Error at arch/arm/dts/.pine64_plus.dtb.dts.tmp:533:27: Failed to find root
> > node /.
> > gic: interrupt-controller@{
> > ^
> > Failed to parse tree.
> > gmake[3]: *** [scripts/Makefile.lib:299: arch/arm/dts/pine64_plus.dtb]
> > Error 1
> > gmake[2]: *** [dts/Makefile:36: arch-dtbs] Error 2
> > gmake[1]: *** [Makefile:821: dts/dt.dtb] Error 2
> > gmake[1]: *** Waiting for unfinished jobs....
> > gmake[1]: Leaving directory
> > '/usr/obj/portswork/usr/ports/sysutils/u-boot-pine64/work/u-boot-2016.05'
> >
> >
> >
> > Looking at the gic part of the source. . .
> >
> > # more
> > /usr/obj/portswork/usr/ports/sysutils/u-boot-pine64/work/u-boot-2016.05/arch/arm/dts/a64.dtsi
> > . . .
> > gic: interrupt-controller@{
> > compatible = "arm,gic-400";
> > interrupt-controller;
> > #interrupt-cells = <3>;
> > #address-cells = <0>;
> >
> > reg = <0x01C81000 0x1000>,
> > <0x01C82000 0x2000>,
> > <0x01C84000 0x2000>,
> > <0x01C86000 0x2000>;
> > interrupts = <GIC_PPI 9
> > (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> > };
> >
Yes the node is wrong but if gpl dtc can handle that maybe we should
to, I'll try to find time to fix that.
> >
> > I'll be trying 3 other u-boot-*'s so I may have more to
> > report later.
>
> The other 3 that I tried worked fine:
>
> Installation of sysutils/u-boot-rpi2 (u-boot-rpi2-2015.04)
> Installation of sysutils/u-boot-rpi3 (u-boot-rpi3-2017.01)
> Installation of sysutils/u-boot-sinovoip-bpi-m3
> (u-boot-sinovoip-bpi-m3-2016.05)
>
> So this may be unique to a64.dtsi and its lack of
> hexadecimal digits after the "@" in what I quoted.
>
> Still, sysutils/u-boot-pine64 used to build. So it may
> be a BSDL vs. GPL DTS issue as far as the handling of
> the notation goes.
>
> ===
> Mark Millard
> markmi at dsl-only.net
I also a patch waiting for comment on the u-boot mailing list
that add the possibility to specify which dtc to use, this will be
needed for the next u-boot for arm64 board as it uses 'incbin'
directive which bsd dtc doesn't support yet (David is looking into it).
Anyway, new u-boot should be out around july 10th so I'll update the
port right after.
Thanks for reporting.
--
Emmanuel Vadot <m...@bidouilliste.com> <m...@freebsd.org>
_______________________________________________
freebsd-toolchain@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-toolchain
To unsubscribe, send any mail to "freebsd-toolchain-unsubscr...@freebsd.org"
