Hello João
On 13.10.08 13:43, JoaoBR wrote:
On Sunday 12 October 2008 06:57:11 Gary Jennejohn wrote:
On Sat, 11 Oct 2008 23:51:18 +0200
Fabian Wenk <[EMAIL PROTECTED]> wrote:
> I do have a system with FreeBSD/amd64 6.3-RELEASE with 4 GB RAM
> and an Adaptec 29160 Ultra160 SCSI adapter (ahc) with only a tape
> drive connected. The disks are on an Areca RAID controller. Access
> to the disks and the tape drive does work just fine without any
> crashes.
This is interesting because the 29160 is exactly the controller with
which I had all my problems, but I was running it with disks only.
I guess his MB is not an AM2 socket
Right, my system board is a Tyan Thunder i7520 (S5360) server
board (with only one Xeon single core CPU). The Adaptec SCSI is a
PCI and the Areca RAID a PCIe controller.
I guess some more facts are needed to track this down. Does it
make troubles with more then one CPU core and also more then 3.5
GB RAM running on FreeBSD/amd64?
If yes, then I'm not surprised that only a few people see this
behavior.
I think the following informations would be needed to narrow down
the affected environment:
- FreeBSD version 6.x, 7.x or 8-CURRENT and i368 or amd64
- make and model of system board
- make and model of SCSI controller and which driver
- on board SCSI controller or PCI / PCI-X / PCIe
- device types connected to the SCSI, eg. disk, tape
- number of cpu cores
- amount of memory
So for my system which works fine, this would be:
- FreeBSD/amd64 6.3-RELEASE
- Tyan Thunder i7520 (S5360)
- Adaptec 29160 Ultra160 SCSI adapter (ahc)
- PCI
- tape drive (DLT-8000)
- 1 cpu core
- 4 GB RAM
bye
Fabian
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
