On Thu, Oct 02, 2008 at 09:57:55PM +0100, Bruce Cran wrote: > I recently upgraded my i386 router from 7.0 to 7.1-PRERELEASE. I > rebooted it today but despite pf_enable="YES" being in /etc/rc.conf no > rules got loaded during boot, despite pf itself having been enabled: > > router# pfctl -s rules > router# pfctl -e -f /etc/pf.conf > pfctl: pf already enabled > [connection is closed due to new rules being loaded] > router# pfctl -s rules > scrub in all fragment reassemble > [... lots of rules listed] > > Has anyone else seen this problem, or have I just missed something > that's changed between 7.0 and 7.1 in the way pf works?
I was seeing something similar on my own box which I just upgraded from a 150-day-old RELENG_6 to present RELENG_6. pfctl -s rules output no rules. pfctl -s info showed packet counters, but no interface stats (due to the rules not being loaded, e.g. no loginterface). kldstat showed pflog.ko and pf.ko loaded. If I did /etc/rc.d/pf start, the rules would loaded, and everything starts working as expected. I rebooted the box and saw the following on serial console, which I'm pretty sure is what's responsible for the breakage: Enabling pf. Oct 3 04:14:51 pflogd[374]: [priv]: msg PRIV_OPEN_LOG received cannot determine interface bandwidth for bge0, specify an absolute bandwidth altq not defined on bge0 altq not defined on bge0 /conf/ME/pf.conf:52: errors in queue definition altq not defined on bge0 /conf/ME/pf.conf:53: errors in queue definition altq not defined on bge0 /conf/ME/pf.conf:54: errors in queue definition pfctl: Syntax error in config file: pf rules not loaded pf enabled I'd recommend you check your kernel console log on boot-up and see if anything is showing up there. I'm about to go digging to find out what's wrong with my ALTQ rules. -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
