I was using a GELI partition for /usr/home on 7.0, so it attaches and mounts on boot. The problem is it stopped working after the system was upgraded to RELENG_7/7.1-PRERELEASE. Here's how it goes:
I have the following /etc/fstab: /dev/ad0s1b none swap sw 0 0 /dev/ad0s1a / ufs rw 1 1 /dev/ad0s1d /tmp ufs rw 2 2 /dev/ad0s1e /var ufs rw 2 2 /dev/ad0s1f.eli /usr/home ufs rw 2 2 After upgrading to 7.1 and rebooting: ... Configuring Disk Encryption for ad0s1f. Enter passphrase: geli: Cannot access ad0s1f (error=1). Attach failed; attempt 1 of 3. Enter passphrase: geli: Wrong key for ad0s1f. Attach failed; attempt 2 of 3. Enter passphrase: geli: Wrong key for ad0s1f. ... (the key entered is actually valid and attaching succeeds on 7.0 at this point). As far as mounting failed i'm entering the single-user mode, where "geli attach /dev/ad0s1f" works perfectly: GEOM_ELI: Device ad0s1f.eli created. GEOM_ELI: Encryption: AES-CBC 128 GEOM_ELI: Crypto: software After that exiting back to multi-user mounts the missing /usr/home, so loading completes. -- Regards, Mirya ICQ #313898202 _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
