On Saturday 05 April 2008 23:48:59 you wrote: > On Sat, 5 Apr 2008, Andrei Kolu wrote: > > I have problems using USB to RS232 converter under FreeBSD 6.3-STABLE > > when connecting to any Cisco gear over serial link. I connect my adapter > > to notebook and dmesg output looks like this one: > > > > ucom0: Prolific Technology Inc. USB-Serial Controller D, rev 1.10/4.00, > > addr 2 > > > > I have also following modules loaded: > > > > 8 1 0xc0c17000 3540 umodem.ko# cu -l /dev/ttyU0 > > Connected > > > > 9 4 0xc0c1b000 3208 ucom.ko > > 10 1 0xc0c1f000 2f54 uplcom.ko > > 13 1 0xc0c2f000 3384 ubsa.ko > > > > Now I try to connect to Cisco box: > > > > # cu -l /dev/ttyU0 > > Connected > > Use /dev/cuaU0 instead. > > -Warren Block * Rapid City, South Dakota USA
There is no difference if I connect through /dev/ttyU0 or /dev/cuaU0 and even through ttyU1 or cuaU1 (when second serial converter is connected)- same problem. I tried on other computer with FreeBSD 6.1 and 7.0-STABLE snapshot from march- same results. Something is broken on FreeBSD side- strange thing is that when I turn power down on cisco box and turn in on again then I see scrolling text from cisco gear but there is no feedback to keyboard activity. How to debug this issue? Andrei _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
