Just for the record - the backport patch works like a charm on 6_3
stable branch!
Thanks a lot Denis!!!
cheers,
valqk.
Anton - Valqk wrote:
Here is the mirror of the backport for 6 that Denis sent me:
http://valqk.ath.cx/nscd_fbsd_6/
Adam McDougall wrote:
According to Denis Barov <[EMAIL PROTECTED]>:
Gzipped patch avialable at
http://www.dindin.ru/wiki/FreeBSD?action=AttachFile&do=get&target=nscd_backport.gz
(78Kb)
Mon, Dec 24, 2007 at 12:15 +0300 Denis Barov:
Hi, Michael!
In attachment patch for backporing nscd from RELENG_7 to RELENG_6.
Tested on
FreeBSD sepulca.yandex.ru 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #0:
Thu Dec
23 22:06:36 MSK 2007
[EMAIL PROTECTED]:/usr/obj/usr/RELENG_6_ncsd/src/sys/GENERIC
amd64
and works fine.
Must I prepare pr?
P.S. Don't forget to mkdir -p src/usr.sbin/nscd/agents before
patching ;)
On Wed, Jan 23, 2008 at 11:52:21AM +0200, Anton - Valqk wrote:
Is there nscd/cached for STABLE 6 branch or it's only implemented
in 7.X?
Adam McDougall wrote:
> I wanted to say Thanks!!! for this example, because before this
point
> I was under the impression that nscd/cached was of no use for NIS
clients,
> only LDAP or maybe other directory systems that I don't use. I
tried
> "cache compat" as below for passwd and group and it works! Our
NIS > entries at work are big enough that without the cache, top
takes 7+ seconds to
> open, ssh login takes a few seconds, and samba logins were
concerningly
> slow. I did not try samba connections, but the other methods are
much > faster now on the second run. Wanted to post this for the
archive too.
>
> On Sat, Jan 19, 2008 at 02:17:11PM +0300, Michael Bushkov wrote:
>
> Hi Denis,
> Several things:
> 1. You definitely can't use cache for *_compat sources. I mean
lines like > "group_compat: cache nis" aren't supported.
> 2. Cache should work ok with the configuration you've mentioned
in your > first example, i.e.: "group: cache compat". Just
checking - why do you > think that cache isn't working? The
correct way to determine it is to > perform the same query twice.
During the first pass (when query is not > cached), the request
will be processed by NIS module and you'll have all > the
NIS-related stuff in the logs. On the second pass the request should
be > handled by scd module - and you shouldn't see any activity
in NIS logs. It > would be great to see the debug log (with nscd
log turned on) separately - > for the first and the second pass.
It would help to find the error in nscd, > if there is one.
> > With best regards,
> Michael Bushkov
> > On Jan 17, 2008, at 9:55 PM, Denis Barov wrote:
> > >>> Hello!
>>>
>>> I found some strange behaviour of NIS/nscd when NIS in compat
mode. In
>>> /etc/nsswitch.conf I have:
>>>
>>> netgroup: cache compat
>>> passwd: cache compat
>>> group: cache compat
>>> > _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
>
> -- This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
