> Date: Mon, 17 Mar 2008 07:36:23 +0100 > From: Kurt Jaeger <[EMAIL PROTECTED]> > Sender: [EMAIL PROTECTED] > > Hi! > > > I'd appreciate suggestions on how to get a working xorg from the mess 6.3 > > shipped with. I've been using FreeBSD since 2.2 and have never had much > > trouble with it until the 6 branch was released. My hardware is pretty > > generic Intel brand D865 motherboard, matrox g550 video. I don't customize > > the kernel. I do clean installs not upgrades. > > Basically, the problem is with the matrox board. > > Due to the very same reasons I had to upgrade my workstation > (good excuse 8-) > > Matrox provides a mga_hal binary to support the relevant resolution > and other gimmicks of that board. This binary works with xorg-6.x, > but not with xorg-7.x, because there were changes in the interfaces > to the low-level things. > > As far as I can see, there is no driver from mga for 7.x available > as of now. > > -- > [EMAIL PROTECTED] +49 171 3101372 12 years > to go ! > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]" >
I have run the Matrox G550 under both 6 and 7. I had some problems, but not too many. I do need to use xrandr to set up the proper resolution, though. #!/bin/sh # Set 1280x1024 mode on second display xrandr --addmode VGA2 1280x1024 # Set 1024x768 mode on second port (Why? Why not.) xrandr --addmode VGA2 1024x768 # Set the second port to use 1280x1024 xrandr --output VGA2 --mode 1280x1024 If you have a dual-monitor setup, you need xf86-video-mga-1.9.100. The version in ports is mga-1.4.7. You will have to pull the old port out of cvs. The version was rolled back on Jan. 2, 2008 due to problems people were having with the new code, Let me know if you need a copy of my xorg.conf for this beast. The xrandr setup is a bit different from the old one. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751
pgp2HY8h78xl6.pgp
Description: PGP signature
