On Mar 17, 2008, at 11:46 AM, Ulf Zimmermann wrote:
On Mon, Mar 17, 2008 at 08:33:20AM +0100, Johan Str?m wrote:
On Mar 16, 2008, at 8:36 AM, Ulf Zimmermann wrote:
On Wed, Mar 12, 2008 at 06:40:49PM -0500, Joe Koberg wrote:
Johan Str?m wrote:
But..
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00553302/c00553302.pdf
seems
to tell me that in basic mode I can only access BIOS (pre-OS)
using the
Remote Console feature, and that after POST I have to have the
advanced
licensed option?
I don't do the purchasing and we get all Advanced iLO, so I will
take
your word for it. The older generations supported text console (i
have
a 360G2 that does so). We use the HP Management agents under
Windows
for all SNMP reporting so I can't comment on the reporting method
under
other OS's.
iLO2 ActiveX based remote console (Integrated KVM) can still do
text only console without license but it doesn't work too well IMHO.
The Java based console is the same, text will work out license but
graphics
mode and that includes certain VESA text modes.
Standard iLO gives the graphical console and virtual media. On Blade
servers
the graphical access and virtual media is included. And the Advanced
license
gives extra stuff like integration into AD for authentication afik.
How about SSH mode? SSH and view textmode at boot (serial rdr in bios
too?) and console @ serial in fbsd (bootloader and on). Does that
work
good or "not to well" either?
Lets hope it works out good now at least, I ordered the box, without
full license though, but I guess I can always get that later on if it
turns out to work like crap.. But for once I'm purchasing quality
brand hardware.. So it should work with me instead of against me... I
hope :)
Thank you all for all of your replies!
iLO1 (used on DL360 g3, g4, g4p and DL380 g3, g4) had text console
via ssh and I have used it often because of cut+paste. Unfortunatly
as far I know iLO2 (used on g5) does not support ssh text console.
Hm.. No not native text console, but the virtual serial port should
work under SSH if I'm reading the manual correct:
"
Although additional configuration steps are required to use Remote
Serial Console (as compared to using
the remote console or IRC), the Remote Serial Console allows telnet or
SSH users to interact with the
server remotely and without requiring an iLO 2 Advanced license and is
the only way a true text-based
remote console is presented by iLO 2.
"
If I've understood correct, the "text console" mode from iLO 1 is
removed all together in favor for graphical mode (the internal
workings have been changed).
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
