Hi,
I'm having problems burning CDs with nautilus-cd-burner. atapicam is ok,
/etc/devfs.rules is ok, I can burn CDs with cdrecord.
I can burn a CD after I have an image file with:
nautilus-cd-burner --source-iso=...
I can produce an image file by dropping everything into burn:/// and then
selecting the image recorder.
It's just when these two things are done together, nautilus-cd-burner stops
leaving the message "Unable to prepare tracks for burning" in .xsession-errors.
I imagine it has mkisofs running and some other process reading mkisofs' stdout.
When it stops reporting this error, the image is already 100% done, but
nautilus-cd-burner is still writing messages like 12% done, 40% done on
.xsession-errors. It is as if it was taking too much time consuming mkisofs
output.
After it stops like this, I can take the image file which is perfect and burn
it.
I'm using /var/tmp for the image file, it is a hard disk.
The only other place where I've found this error message was on some ubuntu
mailing list, but the problem didn't seem to be the same.
Did anyone else ever experienced this? What can be wrong?
Thanks,
Miguel
-- .xsession-errors
make_iso stderr: 4.18% done, estimate finish Sun Oct 28 00:25:50 2007
make_iso stderr: 5.58% done, estimate finish Sun Oct 28 00:25:50 2007
make_iso stderr: 6.97% done, estimate finish Sun Oct 28 00:26:04 2007
make_iso stderr: 8.36% done, estimate finish Sun Oct 28 00:26:01 2007
make_iso stderr: 9.76% done, estimate finish Sun Oct 28 00:26:00 2007
make_iso stderr: 11.15% done, estimate finish Sun Oct 28 00:25:58 2007
process stdout: EOF
make_iso stderr: 12.54% done, estimate finish Sun Oct 28 00:25:57 2007
(nautilus-cd-burner:24967): WARNING **: Unable to prepare tracks for burning
-- uname -a:
FreeBSD satan.anjos.strangled.net 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #2: Sat
Oct 27 23:45:33 WEST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SATAN i386
-- dmesg:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-PRERELEASE #2: Sat Oct 27 23:45:33 WEST 2007
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/SATAN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2304.82-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
real memory = 1877934080 (1790 MB)
avail memory = 1823158272 (1738 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia ASUSACPI> on motherboard
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 2000
acpi0: Power Button (fixed)
acpi0: reservation of fefff000, 1000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
nvidia0: <GeForce 6150> mem
0xfc000000-0xfcffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 16 at
device 5.0 on pci0
nvidia0: [GIANT-LOCKED]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0x4c00-0x4c3f,0x4c40-0x4c7f at
device 10.1 on pci0
smbus0: <System Management Bus> on nfsmb0
smb0: <SMBus generic I/O> on smbus0
nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0
smbus1: <System Management Bus> on nfsmb1
smb1: <SMBus generic I/O> on smbus1
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff at device 11.0
on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at device
11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem
0xfe02d000-0xfe02dfff irq 20 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP51 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem
0xfe02c000-0xfe02cfff irq 21 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xfdbff000-0xfdbff7ff,0xfdbf4000-0xfdbf7fff at device 5.0 on pci4
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:01:24:87:65
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:24:87:65
fwe0: Ethernet address: 02:11:d8:24:87:65
fwe0: if_start running deferred for Giant
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:11:d8:00:01:24:87:65 @ 0xfffe00000000, S400, maxrec
2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfdbfe000-0xfdbfefff at
device 8.0 on pci4
ohci1: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfdbfd000-0xfdbfdfff at
device 8.1 on pci4
ohci2: [GIANT-LOCKED]
usb3: OHCI version 1.0, legacy support
usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ohci3: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfdbfc000-0xfdbfcfff at
device 8.2 on pci4
ohci3: [GIANT-LOCKED]
usb4: OHCI version 1.0, legacy support
usb4: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci3
usb4: USB revision 1.0
uhub4: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci1: <ALi M5239 USB 2.0 controller> mem 0xfdbfb000-0xfdbfb0ff at device 8.3
on pci4
ehci1: [GIANT-LOCKED]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb2 usb3 usb4
usb5: <ALi M5239 USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
pcm0: <NVidia MCP51 High Definition Audio Controller> mem 0xfe024000-0xfe027fff
irq 22 at device 16.1 on pci0
nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0xc800-0xc807 mem
0xfe02b000-0xfe02bfff irq 23 at device 20.0 on pci0
nve0: Ethernet address 00:1a:92:5e:cb:69
miibus0: <MII bus> on nve0
e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nve0: Ethernet address: 00:1a:92:5e:cb:69
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 flags 0xc on acpi0
ppc0: Generic chipset (ECP/EPP) in ECP+EPP mode (EPP 1.9)
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: A4Tech PS/2+USB Mouse, rev 1.10/0.01, addr 2, iclass 3/1
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
ad0: 114473MB <WDC WD1200JB-00EVA0 15.05R15> at ata0-master UDMA100
ad1: 305245MB <Hitachi HDT725032VLAT80 V54OA42A> at ata0-slave UDMA133
unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
ad2: 70911MB <WDC WD740ADFD-00NLR5 21.07QR5> at ata2-master SATA150
unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00 0x01
pcm0: hdac_widget_connection_parse: nid=18 WARNING: zero cnid entnum=4 j=2
index=0 entries=8 found=2 res=0x21002211
pcm0: <HDA Codec: Analog Devices AD1986A>
pcm0: <HDA Driver Revision: 20071020_0048>
SMP: AP CPU #1 Launched!
cd1 at ata1 bus 0 target 1 lun 0
cd1: <ASUS DRW-1608P3S 1.19> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ata1 bus 0 target 0 lun 0
cd0: <CREATIVE DVD-ROM DVD1243E IC01> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad2s1a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /usr/local was not properly dismounted
/usr/local: mount pending error: blocks 204 files 1
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 564 files 35
WARNING: /var/tmp was not properly dismounted
WARNING: /x1 was not properly dismounted
WARNING: /x2 was not properly dismounted
WARNING: /x3 was not properly dismounted
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled,
default to deny, logging disabled
fuse4bsd: version 0.3.0, FUSE ABI 7.8
unknown: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00
unknown: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00
(cd1:ata1:0:1:0): READ TOC/PMA/ATIP {MMC Proposed}. CDB: 43 0 0 0 0 0 0 0 4 0
(cd1:ata1:0:1:0): CAM Status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI Status: Check Condition
(cd1:ata1:0:1:0): ILLEGAL REQUEST asc:24,0
(cd1:ata1:0:1:0): Invalid field in CDB
(cd1:ata1:0:1:0): Unretryable error
unknown: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02
unknown: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d
0x00 0x02
unknown: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d
0x00 0x02
unknown: FAILURE - READ_BUFFER ILLEGAL REQUEST asc=0x24 ascq=0x00
unknown: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d
0x00 0x02
unknown: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d
0x00 0x02
unknown: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00
unknown: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d
0x00 0x02
unknown: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d
0x00 0x02
unknown: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d
0x00 0x02
unknown: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d
0x00 0x02
unknown: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00
unknown: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00
(cd1:ata1:0:1:0): READ TOC/PMA/ATIP {MMC Proposed}. CDB: 43 0 0 0 0 0 0 0 4 0
(cd1:ata1:0:1:0): CAM Status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI Status: Check Condition
(cd1:ata1:0:1:0): ILLEGAL REQUEST asc:24,0
(cd1:ata1:0:1:0): Invalid field in CDB
(cd1:ata1:0:1:0): Unretryable error
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
