2007/8/17, Eugene Grosbein <[EMAIL PROTECTED]>: > On Fri, Aug 17, 2007 at 08:47:01AM +0200, peceka wrote: > > > I've got strange problem. I've setup pound on my FBSD6 box and > > sometimes it (pound) stops. Normally it should exit but it doesn't - > > it hangs. > > > > # ps auwx | grep pound > > pound 46868 0.0 1.0 55428 21932 ?? SE 1:58PM 0:31.34 > > /usr/local/sbin/pound -f /usr/local/etc/pound.cfg > > > > S: Marks a process that is sleeping for less than about 20 seconds. > > E: The process is trying to exit. > > > > It dies after 30 minutes. > > > > This problem doesn't exists on Linux. > > > > This behaviour is very irregular. > > Why FBSD doesn't kill this process? > > It does if it become 'trying to exit'. > It may have a serial device open and bugs in the driver may prevent > process from closing device in timely manner. Try switching to uart(4) driver > from sio(4) if this is your case.
But pound (web reverse proxy: http://www.apsis.ch/pound/) has nothing common with serial device. So this solution is not for me. :( Regards, p. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
