patch did not help ...
ifconfig:
# ifconfig
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether XX:XX:XX:XX:XX:XX
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
lagg: laggdev lagg0
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether XX:XX:XX:XX:XX:XX
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
lagg: laggdev lagg0
pfsync0: flags=0<> mtu 2020
syncpeer: 224.0.0.240 maxupd: 128
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33160
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.0.0.1 netmask 0xffff0000 broadcast 10.0.255.255
inet 10.0.0.2 netmask 0xffff0000 broadcast 10.0.255.255
ether XX:XX:XX:XX:XX:XX
media: Ethernet autoselect
status: active
laggproto lacp
laggport: em1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
laggport: em0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
vlan302: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1496
inet 192.168.111.7 netmask 0xffffff00 broadcast 192.168.111.255
inet 192.168.111.1 netmask 0xffffff00 broadcast 192.168.111.255
ether XX:XX:XX:XX:XX:XX
media: Ethernet autoselect
status: active
vlan: 302 parent interface: lagg0
vlan150: flags=8843<UP,BROADCAST ,RUNNING,SIMPLEX,MULTICAST> mtu 1496
inet 192.168.150.1 netmask 0xffffff00 broadcast 192.168.150.255
ether XX:XX:XX:XX:XX:XX
media: Ethernet autoselect
status: active
vlan: 150 parent interface: lagg0
and other VLANs ..... all on lagg0 interface
i was tried to change laggproto, it doesn't help.
i can NOT increase MTU on lagg interface above 1500 and on vlan interface
above lagg's MTU -4 .
also i've increased MTU on both ems to 9000 and after that i still can't
increase MTU on lagg interface above 1500
please, HELP ...
and VERY LITTLE part of dmesg:
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
vlan301: discard oversize frame (ether type 800 flags 3 len 1514 > max 1510)
2007/7/25, Andrew Thompson <[EMAIL PROTECTED] >:
On Wed, Jul 25, 2007 at 03:15:17AM +0400, Alexey Karagodov wrote:
> is there any progress?
> just one "me too"
>
> this problem appeared for me when i try to use vlan over lagg ( to em
NICs
> )
lagg on RELENG_6 is currently broken due to subtle differences that
wernt taken into account when it was MFCd. Can you please test this
patch.
Index: if_lagg.c
===================================================================
RCS file: /home/ncvs/src/sys/net/if_lagg.c,v
retrieving revision 1.11.2.3
diff -u -p -r1.11.2.3 if_lagg.c
--- if_lagg.c 12 Jul 2007 20:40:24 -0000 1.11.2.3
+++ if_lagg.c 25 Jul 2007 00:43:24 -0000
@@ -319,6 +319,7 @@ lagg_lladdr(struct lagg_softc *sc, uint8
if (memcmp(lladdr, IF_LLADDR(ifp), ETHER_ADDR_LEN) == 0)
return;
+ bcopy(lladdr, IFP2ENADDR(ifp), ETHER_ADDR_LEN);
bcopy(lladdr, IF_LLADDR(ifp), ETHER_ADDR_LEN);
/* Let the protocol know the MAC has changed */
if (sc->sc_lladdr != NULL)
> 2007/7/13, Chuck Swiger <[EMAIL PROTECTED]>:
> >
> >On Jul 12, 2007, at 1:38 PM, Stephen Clark wrote:
> >>> The MTU is actually defined in reference to a network segment such
> >>> as an "ethernet collision domain", and applies to all machines
> >>> sending traffic to that segment. If the MTU is really 1280,
> >>> nobody else should be sending larger packets, and the drivers
> >>> will drop any larger packets they receive and generate the
> >>> appropriate ICMP error....
> >>
> >> First thanks for responding but thats the problem,
> >> this did't generate an icmp when the packet was dropped.
> >>
> >> kernel: rl0: discard oversize frame (ether type 800 flags 3 len
> >> 1514 > max
> >> 1294)
> >>
> >> This message did not result in any icmp packet.
> >>
> >> I was running tcpdump looking for them.
> >
> >Taking a quick look at ether_input() in src/sys/net/if_ethersubr.c
> >suggests that you are right-- if the incoming packet exceeds the MTU
> >being set, the input errors count for that interface is incremented,
> >but no ICMP_UNREACH_NEEDFRAG is generated even if DF flag is set.
> >
> >You might file a PR and see whether you can get Andre or one of the
> >other networking gurus interested in fixing this. Or maybe I'll give
> >it a try myself if I can get some free time.... :-)
> >
> >--
> >-Chuck
> >
> >
> >_______________________________________________
> > freebsd-stable@freebsd.org mailing list
> >http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> >To unsubscribe, send any mail to "freebsd-stable-unsubscribe @
freebsd.org"
> >
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@
freebsd.org"
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
