Quoting Tom Evans <[EMAIL PROTECTED]>:
On Wed, 2007-06-13 at 20:34 +0200, Momchil Ivanov wrote:
Hi guys,
I am running 6-STABLE as of today and I cannot use the CD-RW on my
IBM T40 to
burn CDs. When I put atapicam_load="YES" in loader.conf or compile it in the
kernel I see the following error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40
0x00 0x01
and no /dev/cd0 is created. I don`t see the above error without atapicam
loaded or in kernel. This is not something new, I haven`t been able to
get /dev/cd0 since more than a month following 6-STABLE, don`t know if it
ever worked on 6 or 6.x, but I certainly cannot get it to work on 6-STABLE.
Any help would be appreciated :) I would be happy ot be able to burn CDs.
I have acd0: CDRW <TOSHIBA DVD-ROM SD-R9012/1121> at ata1-master UDMA33
and camcontrol shows:
<TOSHIBA DVD-ROM SD-R9012 1121> at scbus2 target 0 lun 0 (pass1)
Thanks
The error message is benign - the controller tries to send a command to
the device, the device doesn't support it, so you get the error message.
That's all, everything else should work.
Do you load or compile into your kernel
device scbus
device cd
device atapicam
atapicam allows you to access ATAPI devices through the SCSI subsystem,
so you must ensure that you have a SCSI subsystem to access them
through.
Cheers
Tom
Hi Tom,
I am getting a very similar error with my sony cdrom:
Jun 14 07:12:36 HOME kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST
asc=0x24 ascq=0x00
Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): error 22
Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): Unretryable Error
Jun 14 07:12:36 HOME kernel: pass0 at ata1 bus 0 target 1 lun 0
Jun 14 07:12:36 HOME kernel: pass0: <SONY CD-RW CRX230ED 4YS1>
Removable CD-ROM SCSI-0 device
Jun 14 07:12:36 HOME kernel: pass0: 33.000MB/s transfers
Jun 14 07:12:36 HOME kernel: GEOM: new disk cd0
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error
Jun 14 07:12:36 HOME kernel: cd0 at ata1 bus 0 target 1 lun 0
Jun 14 07:12:36 HOME kernel: cd0: <SONY CD-RW CRX230ED 4YS1>
Removable CD-ROM SCSI-0 device
Jun 14 07:12:36 HOME kernel: cd0: 33.000MB/s transfers
Jun 14 07:12:36 HOME kernel: cd0: Attempt to query device size failed:
NOT READY, Medium not present
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error
There was a good cd in the burner when booting.
the unfortunate part is that in this case, it doesn't seem to be
benign because I can't mount any cd nor can I use burncd or k3b.
Any suggestions appreciated. IIRC, I can use burncd if I remove scsi support.
Thanks,
ed
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
