Hi
I personally would say its a major mistake to use these pseudo-hardware
controllers.
I really recommend you either use software-raid via gvinum or buy a true
full-capable hardware raid controller.
cheers
Krassimir Slavchev wrote:
Hello,
I have problems rebuilding RAID1 array. The bios shows status
'Rebuild' and 'Volumes with "Rebuild" status will be rebuilt within
the operating system'.
When I try to do 'atacontrol rebuild ar0':
atacontrol: ioctl(IOCATARAIDREBUILD): Device not configured
I run 6.2-STABLE:
dmesg:
...
atapci1: <Intel ICH8 SATA300 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f
mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata5: <ATA channel 0> on atapci1
ata6: <ATA channel 1> on atapci1
ata7: <ATA channel 2> on atapci1
ata8: <ATA channel 3> on atapci1
ata9: <ATA channel 4> on atapci1
ata10: <ATA channel 5> on atapci1
...
ad10: 152627MB <Seagate ST3160811AS 3.AAE> at ata5-master SATA300
ad12: 152627MB <Seagate ST3160811AS 3.AAE> at ata6-master SATA300
ar0: 152625MB <Intel MatrixRAID RAID1> status: READY
ar0: disk0 READY (master) using ad10 at ata5-master
ar0: disk1 READY (mirror) using ad12 at ata6-master
pciconf -lv:
[EMAIL PROTECTED]:31:2: class=0x010400 card=0x81ec1043 chip=0x28228086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = RAID
atacontrol status ar0:
ar0: ATA RAID1 subdisks: ad10 ad12 status: READY
The motherboard is Asus P5-E.
How to rebuild my RAID?
Thanks in advance
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
--
Georg 'Therion' Bege
http://coruscant.info
http://www.ninth-art.de
[EMAIL PROTECTED] <therion at ninth minus art dot de>
GnuPG-Key-ID: 0x5717E214
FingerPrint: A8EC B4B2 C9A9 483B CC87 56EE 07A1 C78E 5717 E214
!DSPAM:465172ad25448062420477!
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
