Hi. Is there any way to understand the following message from aac driver?
Apr 13 11:06:42 xxx kernel: aac0: EventNotify(0) Apr 13 11:06:42 xxx kernel: aac0: (EnclosureManagement) EMPID 0 unit 0 event 22 Hardware is Adaptec 2420SA SATA RAID controller. Kernel was built with AAC_DEBUG=0 option specially for debug messages (aaccli does not work with this card). Controller is running with one RAID1 array, and first physical disk displays "SMART Error" on boot screen: Port# Box# Slot# Vendor Product Info Rev# Speed Size SMART Error ------------------------------------------------------------------------- 0 -- -- ST3250820A 3.AA 3.0 Gb/s 232.88 GB Y 1 -- -- ST3250820A 3.AA 3.0 Gb/s 232.88 GB N So, "unit 0" is the first disk, and "event 22" is a SMART error? Can I find the list of other possible "events"? We still don't have working CLI utility for newer adaptec cards in 6-STABLE? I also work with several boxes under Solaris 10 x86 with the same hardware. I use arcconf utility from StorMan package and it works perfect. | UCLI | Adaptec uniform command line interface | UCLI | Version 4.30 (B16038) | UCLI | (C) Adaptec 2003-2006 | UCLI | All Rights Reserved But of course it is unreal to get source code... -- Andrew _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
