hi some else has seen this? With more then 2 scsi disks on one channel I get the error below. The machine seems to work on all disks after then. With one or two disks the machine boots well.
The error does not appear with FC6 and Tyan support argues a freebsd driver problem. some idea what I can do? Waiting 10 seconds for SCSI devices to settle ahd0: Invalid Sequencer interrupt occurred. >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< ahd0: Dumping Card State at program address 0x23c Mode 0x0 Card was paused INTSTAT[0x0] SELOID[0x2] SELID[0x10] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x6] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x3] KERNEL_QFREEZE_COUNT[0x3] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xd NEXTSCB 0xff00 qinstart = 36 qinfifonext = 37 QINFIFO: 0xf WAITING_TID_QUEUES: Pending list: 15 FIFO_USE[0x0] SCB_CONTROL[0x48] SCB_SCSIID[0x7] Total 1 Kernel Free SCB list: 14 13 1 2 3 4 5 6 7 8 9 10 11 12 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xe SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xd SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x8 0x0 0x0 0xe 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x0] ahd0: REG0 == 0x7ffd, SINDEX = 0x10e, DINDEX = 0x106 ahd0: SCBPTR == 0xe, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xd CDB 12 20 0 80 8 25 STACK: 0x237 0x2 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x0 0x0 0x0 0x0 Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 da0 at ahd0 bus 0 target 0 lun 0 da0: <MAXTOR ATLAS15K2_36WLS JNZH> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C) da1 at ahd0 bus 0 target 1 lun 0 da1: <SEAGATE ST373207LW 0005> Fixed Direct Access SCSI-3 device da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) da2 at ahd0 bus 0 target 2 lun 0 da2: <SEAGATE ST373207LW 0005> Fixed Direct Access SCSI-3 device da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da2: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) Trying to mount root from ufs:/dev/da0s1a -- João A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura. Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
