On Mon, Mar 05, 2007 at 08:41:01AM -0800, Jack Vogel wrote:
> >
> >Maybe more of your dmesg might help as it could show interrrupt issues
> >that perhaps others could help diagnose
>
> Yes, agreed, this might be revealing.
Here's the full dmesg. Thanks for looking at this.
----------------------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Sun Mar 4 22:40:38 MST 2007
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (2000.08-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 3489005568 (3327 MB)
avail memory = 3414384640 (3256 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x2000-0x201f m
em 0xda000000-0xda01ffff irq 18 at device 0.0 on pci4
em0: Ethernet address: 00:30:48:8c:71:54
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x2020-0x203f m
em 0xda020000-0xda03ffff irq 19 at device 0.1 on pci4
em1: Ethernet address: 00:30:48:8c:71:55
pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci5: <ACPI PCI bus> on pcib5
3ware device driver for 9000 series storage controllers, version: 3.60.02.012
twa0: <3ware 9000 series Storage Controller> port 0x3000-0x303f mem 0xd8000000-0
xd9ffffff,0xda100000-0xda100fff irq 24 at device 1.0 on pci5
twa0: [GIANT-LOCKED]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9550SX-4LP, 4 ports, Firm
ware FE9X 3.04.01.011, BIOS BE9X 3.04.00.002
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 17 at device 29.0
on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1
on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2
on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3
on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xda600000-0xda6003ff irq 17 at d
evice 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,
0x376,0x1880-0x188f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on ac
pi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcc7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
rue0: USBKR100 USB 10/100 LAN, rev 1.10/1.00, addr 2
miibus0: <MII bus> on rue0
ruephy0: <RealTek RTL8150 internal media interface> on miibus0
ruephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rue0: Ethernet address: 00:10:60:dd:ed:e9
rue0: if_start running deferred for Giant
Timecounter "TSC" frequency 2000078406 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B103> at ata0-master UDMA33
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9550SX-4LP DISK 3.04> Fixed Direct Access SCSI-3 device
da0: 100.000MB/s transfers
da0: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
da1 at twa0 bus 0 target 1 lun 0
da1: <AMCC 9550SX-4LP DISK 3.04> Fixed Direct Access SCSI-3 device
da1: 100.000MB/s transfers
da1: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
Trying to mount root from ufs:/dev/da0s1a
em0: link state changed to UP
em0: promiscuous mode enabled
em0: promiscuous mode disabled
twa0: INFO: (0x04: 0x0029): Verify started: unit=0
twa0: INFO: (0x04: 0x002B): Verify completed: unit=0
----------------------------
This is while booting GENERIC. I can boot SMP and send that too if you
suggest.
Here's vmstat -i:
interrupt total rate
irq1: atkbd0 2 0
irq6: fdc0 3 0
irq14: ata0 47 0
irq16: uhci3 14836 0
irq17: uhci0 ehci0 25 0
irq18: em0 uhci2 91850 2
irq24: twa0 14828 0
cpu0: timer 79015190 1999
Total 79136781 2003
Is the fact that em0 and uhci2 are sharing an interrupt significant?
