Am Dienstag, 30. Januar 2007 09:54 schrieb Oliver Fromme: > Hi, > > This is strange. gmirror just detached one of its disks > for no apparent reason. I've built a mirror consisting of > the components ad0 and ad1 (both SATA drives). It has > been running fine. This is RELENG_6 from 2006-12-20. > > Yesterday evening ad1 was detached. There is no other > error message logged on console or in the logs (i.e. no > I/O error such as a bad sector or anything). There was > no particularly high load at that time. In fact, the > machine had been under much higher load before, without > anything bad happening. > > This is from the logs: > > Jan 29 19:10:13 pluto -- MARK -- > Jan 29 19:20:26 pluto kernel: ad1: FAILURE - device detached > Jan 29 19:20:26 pluto kernel: subdisk1: detached > Jan 29 19:20:26 pluto kernel: ad1: detached > Jan 29 19:20:26 pluto kernel: GEOM_MIRROR: Cannot write metadata on ad1 > (device=gm0, error=6). Jan 29 19:20:26 pluto kernel: GEOM_MIRROR: Cannot > update metadata on disk ad1 (error=6). Jan 29 19:20:26 pluto kernel: > GEOM_MIRROR: Cannot update metadata on disk ad1 (error=6). Jan 29 19:20:26 > pluto kernel: GEOM_MIRROR: Device gm0: provider ad1 disconnected. Jan 29 > 19:50:13 pluto -- MARK -- > > This almost looks like typical Windows problems: Something > reports a "failure", but no reason or any other useful > information. :-( > > "atacontrol list" reports for ad1:: > > Master: no device present > > After an atacontrol detach/attach cycle, the device is back > again: > > Master: ad1 <SAMSUNG HD160JJ/WU100-41> Serial ATA II > > I inserted it back into the gmirror, and right now it's > synchronizing happily. > > Can anybody please explain what happened, and -- more > importantly -- how to avoid it in the future? As far as > I can tell, the disk drives are perfectly OK.
I think this is a problem when the internal thermal recalibration takes too long. Consumer HDDs can be "offline" quiet some time, I don't have numbers handy, but see Western Digitals explanation on their SATA RE (RaidEdition) Drives. Again, no link handy, sorry. -Harry _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
