Artem Kuchin wrote:
Hello!
I am having a VERY weird problem.
The pc config is:
1) Celeron 1+ GHZ
2) Intel PCI ethernet nic
3) Fasttrak TX2000 raid + 2 mirrored disks (seagate 80gb)
4) teac dvd driver
5) 512 MB ram
6) Chaintech montherboard (old one)
also tried on gigabyte motherboard
I insert boot cd and when it starts loading a get a dump
of cpu register scrolling crazy on the screen.
If i delete TX2000 the installer loads fine.
Any idea what is happening and how to SOLVE it?
I have seen this with a Tyan PIII board + TX2000. In my case re-trying
the boot from cd several times would *eventually* get a working
installer session. (If you search the archives you'll see several cases
of folks encountering this). Unfortunately I don't know of any solution.
A (tedious) workaround (in case repeated attempts always fail for you),
is to install a minimal system off an earlier version of FreeBSD and run
the installer off the installed system - or just src upgrade to the
version you want. I found that the 4.x, 5.0, 5.1 and 5.2 cd's all worked
fine - but 5.3 onwards and 6.x would register dump.
Cheers
Mark
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
