On Sunday, 7. January 2007 20:08, Peter Jeremy wrote: > On Sun, 2007-Jan-07 17:44:24 +0100, Christoph Illnar wrote: > >I keep having troubles compiling either 6.1-RELEASE and 6.2-RC2. > >I downloaded sources, extracted them with install.sh and did a cvsup. > > > >My installed system is 6.1-RELEASE and I keep trying to compile it on my > >own. > > Is the failure consistent? I suspect you may have bad RAM. > > >===> lib/libpthread (all) > > [.......... lines suppressed ......]
> >make: don't know how to make > >/usr/src.lib/libpthread/arch/i386/include/pthread_md.h. Stop > >*** Error code 2 > > Note that: > 1) "/usr/src.lib/" does not normally exist; > 2) "." and "/" differ by 1 bit; > 3) The cc line shows "-I/usr/src/lib/libpthread/arch/i386/include"; > 4) Compiling thr_condattr_init.c uses the same #include sequence to > successfully load "pthread_md.h"; > 5) None of the test build boxes are reporting any problems. > > Please try running a memory test, or swapping your RAM. I got similar problem with "faulty" PSU- Chieftec 410W. Memtest accepted RAM sticks- not a single error within 24h but when I started writing something onto raid then system rebooted randomly with various error messages. Changed PSU and all problems was gone. Same Chieftec 410W PSU works fine with other box. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
