Sorry, but you dont want to do this. This is a hybrid
sorta NIC, the PHY is only 10/100, but the MAC is
a Gig part.
Get the latest em driver and load that, guess what, it
will work.
Dont look at me, wasnt my idea :)
Jack
On 10/27/06, Mike Tancsa <[EMAIL PROTECTED]> wrote:
At 12:33 PM 10/27/2006, Jack Vogel wrote:
>On 10/27/06, Kurt Jaeger <[EMAIL PROTECTED]> wrote:
>>Hi!
>>
>>Can someone report success with the onboard GigE ports of an
>>Intel S5000PAL board ?
>>
>>Thanks for any report 8-}
>
>This is one of our new systems, the onboard NICs require either
>the latest driver you can download from Intel, or the community
>STABLE that is named after my Intel driver (6.1.4).
Hi,
Speaking of device IDs, I picked up a new Intel 946GZis MB
that has an Intel 10/100 (I am guessing fxp?) thats not recognized by
the stock fxp driver. Is it safe to just add the device IDs? The box
part # says boxd946gzissl
[EMAIL PROTECTED]:8:0: class=0x020000 card=0x00018086 chip=0x10948086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
I am not sure if the name is quite right
[r6-32bit]# diff -c if_fxp.c.orig if_fxp.c
*** if_fxp.c.orig Fri Oct 27 17:02:21 2006
--- if_fxp.c Fri Oct 27 17:03:21 2006
***************
*** 179,184 ****
--- 179,185 ----
{ 0x1068, -1, "Intel 82801FBM (ICH6-M) Pro/100 VE Ethernet" },
{ 0x1069, -1, "Intel 82562EM/EX/GX Pro/100 Ethernet" },
{ 0x1092, -1, "Intel Pro/100 VE Network Connection" },
+ { 0x1094, -1, "Intel Pro/100 946GZ (ICH7) Network Connection" },
{ 0x1209, -1, "Intel 82559ER Embedded 10/100 Ethernet" },
{ 0x1229, 0x01, "Intel 82557 Pro/100 Ethernet" },
{ 0x1229, 0x02, "Intel 82557 Pro/100 Ethernet" },
[r6-32bit]#
but it seems to work
[r6-32bit]% grep -i fxp /var/run/dmesg.boot
fxp0: <Intel Pro/100 946GZ (ICH7) Network Connection> port
0x1100-0x113f mem 0x90000000-0x90000fff irq 20 at device 8.0 on pci4
miibus1: <MII bus> on fxp0
fxp0: Ethernet address: 00:16:76:be:96:ce
fxp0: link state changed to DOWN
fxp0: link state changed to UP
fxp0: <Intel Pro/100 946GZ (ICH7) Network Connection> port
0x1100-0x113f mem 0x90000000-0x90000fff irq 20 at device 8.0 on pci4
miibus1: <MII bus> on fxp0
fxp0: Ethernet address: 00:16:76:be:96:ce
[r6-32bit]%
[r6-32bit]%
[EMAIL PROTECTED]:8:0: class=0x020000 card=0x00018086 chip=0x10948086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
[r6-32bit]#
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
