On Monday, 16 October 2006 at 20:15:26 +0300, Andriy Gapon wrote:
> 
> In STABLE and upcoming 6.2 (and in CURRENT, of course) there is a new
> SMB driver for NForce2/3/4 chipsets, nfsmb, developed by Ruslan Ermilov.
> However, the driver doesn't currently work on all hardware that it is to
> support. The problem is with choosing proper BAR registers, which, as it
> seems, might be different for different chipsets/SMB controllers.
> 
> If you have a system based on NForce2/3/4, could you please share the
> following information:
> 
> 1. find out pci handle of your SMB controller:
> $ pciconf -l | fgrep 0x0c0500
> and also note chip field value, it should match 00(64|84|d4|e4|52)10de.
> E.g.:
> [EMAIL PROTECTED]:1:1:        class=0x0c0500 card=0x1c02147b chip=0x006410de
> rev=0xa2 hdr=0x00
> 
> 2. read values in BARs 4 and 5 and also registers 0x50 and 0x54 like
> follows:
> $ pciconf -r pci0:1:1 0x20
> $ pciconf -r pci0:1:1 0x24
> $ pciconf -r pci0:1:1 0x50
> $ pciconf -r pci0:1:1 0x54
> using your pci handle instead of pci0:1:1, e.g.:
> $ pciconf -r pci0:1:1 0x20
> 00000000
> $ pciconf -r pci0:1:1 0x24
> 00000000
> $ pciconf -r pci0:1:1 0x50
> 00001001
> $ pciconf -r pci0:1:1 0x54
> 00001041
> 
> 3. send chip id and register values here.
> 
> Thank you very much in advance.
> 
> -- 
> Andriy Gapon
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"


[EMAIL PROTECTED]:~# pciconf -l | fgrep 0x0c0500
[EMAIL PROTECTED]:1:1: class=0x0c0500 card=0x813f1043 chip=0x00e410de rev=0xa1 
hdr=0x00


[EMAIL PROTECTED]:~# pciconf -r pci0:1:1 0x20
00005001
[EMAIL PROTECTED]:~# pciconf -r pci0:1:1 0x24
00005041
[EMAIL PROTECTED]:~# pciconf -r pci0:1:1 0x50
00005001
[EMAIL PROTECTED]:~# pciconf -r pci0:1:1 0x54
00005041

-- 
======================================================================  
- Best regards, Nikolay Pavlov. <<<-----------------------------------    
======================================================================  

_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to