Andriy Gapon wrote:
In STABLE and upcoming 6.2 (and in CURRENT, of course) there is a new
SMB driver for NForce2/3/4 chipsets, nfsmb, developed by Ruslan Ermilov.
However, the driver doesn't currently work on all hardware that it is to
support. The problem is with choosing proper BAR registers, which, as it
seems, might be different for different chipsets/SMB controllers.
If you have a system based on NForce2/3/4, could you please share the
following information:
1. find out pci handle of your SMB controller:
$ pciconf -l | fgrep 0x0c0500
and also note chip field value, it should match 00(64|84|d4|e4|52)10de.
E.g.:
[EMAIL PROTECTED]:1:1: class=0x0c0500 card=0x1c02147b chip=0x006410de
rev=0xa2 hdr=0x00
2. read values in BARs 4 and 5 and also registers 0x50 and 0x54 like
follows:
$ pciconf -r pci0:1:1 0x20
$ pciconf -r pci0:1:1 0x24
$ pciconf -r pci0:1:1 0x50
$ pciconf -r pci0:1:1 0x54
using your pci handle instead of pci0:1:1, e.g.:
$ pciconf -r pci0:1:1 0x20
00000000
$ pciconf -r pci0:1:1 0x24
00000000
$ pciconf -r pci0:1:1 0x50
00001001
$ pciconf -r pci0:1:1 0x54
00001041
3. send chip id and register values here.
Thank you very much in advance.
[EMAIL PROTECTED]:1:1: class=0x0c0500 card=0x815a1043 chip=0x005210de rev=0xa2
hdr=0x00
pciconf -r pci0:1:1 0x20
00004c01
pciconf -r pci0:1:1 0x24
00004c41pciconf -r pci0:1:1 0x50
00004c01
pciconf -r pci0:1:1 0x54
00004c41
FreeBSD cheffo.freebsd-bg.org 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #10:
Sun Oct 8 20:01:14 EEST 2006
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
