On Fri, Oct 13, 2006, at 19:32:39 -0500, Mark Kane wrote: > Hi everyone. > > I rebooted my machine today and when it came back up and I tried to > load the snd_emu10k1 kernel module, the machine hung without returning > to the prompt. I tried waiting 5-10+ minutes and it was totally > irrecoverable. At that point, nothing had changed since the last > reboot so it was weird that it would happen all of a sudden. > > Last week I did cvsup to RELENG_6 after 6.2 BETA 2 was out and built > world/kernel with the intent to update and use it, but I never got > around to finishing the process (I had not installed anything either, > so it was just sitting all built). So tonight when the hanging of > emu10k1 happened, I did the installkernel/installworld process as > normal thinking something might have been fixed between my previous > cvsup (September 21 I believe) and my current one from Oct 5. > Unfortunately there was no change in behavior -- it hung again and I > waited at least 10 minutes before hard rebooting. > > I'm currently running: > > FreeBSD amd64.localhost 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #15: Thu > Oct 5 17:52:05 CDT 2006 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/AMD643000 amd64 > > With a Sound Blaster Augidy 2 Platinum: > > [EMAIL PROTECTED]:8:0: class=0x040100 card=0x10021102 chip=0x00041102 > rev=0x04 hdr=0x00 vendor = 'Creative Labs' > device = 'SoundBlaster Audigy Audigy Audio Processor' > class = multimedia > subclass = audio > [EMAIL PROTECTED]:8:1: class=0x098000 card=0x00601102 chip=0x70031102 > rev=0x04 hdr=0x00 vendor = 'Creative Labs' > device = 'EMU10K2 Audigy Gameport' > class = input device > [EMAIL PROTECTED]:8:2: class=0x0c0010 card=0x00101102 chip=0x40011102 > rev=0x04 hdr=0x00 vendor = 'Creative Labs' > device = 'EMU10K2 Audigy IEEE1394 Firewire Controller' > class = serial bus > subclass = FireWire > > Later on tonight I can try to cvsup to RELENG_6 and rebuild again to > see if it has been fixed already, but I need my CPU power for some > encoding at the moment. Also, I'd rather not have to do a third hard > reboot with an hour long fsck for seven hard drives, so I wanted to > post here first in case it's known already or if anyone has any > suggestions before doing it again. > > Thanks in advance. > > -Mark
I cvsupped to RELENG_6 last night at about 3 AM Eastern and rebuilt world/kernel. I tried again this morning loading the snd_emu10k1 module manually after booting and the machine hung as before. I heard the usual brief crack/pop out of the sound card as if it had loaded, but then it does not return to prompt or respond to SSH/any keyboard input anymore. I let it sit a bit longer this time, over 15 minutes...would not recover. After the hard reboot and fsck, I compiled "device sound" and "device snd_emu10k1" into my kernel which is working fine now. So it's only a problem when loading the module. I can open a PR if needed, but I don't really have any data or debugging info (no errors on the screen, or in /var/log/messages). I only know that after the system was up since the last rebuild and I rebooted it yesterday, the system hangs indefinitely upon loading the snd_emu10k1 module even though I had not changed any system configuration in that time. I did have a new world/kernel built before yesterday's reboot, but not installed. Thanks -Mark FreeBSD amd64.localhost 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #17: Sat Oct 14 13:58:30 CDT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/AMD643000 amd64 -- Internet Radio: Party107 (Trance/Electronic) - http://www.party107.com Rock 101.9 The Edge (Rock) - http://www.rock1019.net IRC: MIXXnet IRC Network - irc.mixxnet.net (Nick: MIXX941) _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
