Hi,
I have a smallish problem, got a backup server with ASUS PC-DL motherboard that
doesn't have a 64 bit pci slot
and a 3ware 9500S-8 card. The machine resets the controller every now and then,
but when there's enough disk
io when it tries to do that the machine crashes.
console warnings:
twa0: INFO: (0x04: 0x000c): : unit=0
twa0: ERROR: (0x05: 0x210b): Request timed out!: request = 0xc64fb1f0
twa0: INFO: (0x16: 0x1108): Resetting controller...:
twa0: INFO: (0x04: 0x0001): : SoftResetCount=1
twa0: INFO: (0x16: 0x1107): Controller reset done!:
twa0: INFO: (0x04: 0x000c): : unit=0
lspci -vv :
03:0b.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID
Subsystem: 3ware Inc 9xxx-series SATA-RAID
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2250ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at b000
Region 1: Memory at fb800000 (64-bit, non-prefetchable)
Region 3: Memory at fb000000 (64-bit, prefetchable)
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
And on the risk of sounding stupid, doesn't this "64bit+" mean that freebsd is
using it "with 64 bit" support?
And if it indeed does, is there any way to force it off?
If there isn't a simple solution, were just getting a motherboard with 64bit
pci slot.
Thanks
-Ville
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
