-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sergei Mozhaisky Sent: Wednesday, May 17, 2006 5:57 AM To: freebsd-stable@freebsd.org Subject: Messages from rc-scripts are not displayed at all
Hello everyone. Got a problem on FreeBSD 6.1. After kernel boot messages there are no messages from rc scripts until login prompt displayed (but rc scripts are started OK). Boot process looks like: Mounting root from /dev/ad0s1 <last kernel message> <here is a long pause while rc scripts started> FreeBSD/i386 (frenzy) (ttyv0) login: This bug was seen not on all computers. Currently I found 3 PC with this problem (two on AMD platform, one on Intel). Video adapters on them are also different. Any suggestions? -- .O. | Sergei Mozhaisky ..O | http://frenzy.org.ua/ OOO | http://frenzytechnix.livejournal.com/ I am seeing this, too. dmesg is not getting anything from the later scripting (in my case, notably from /etc/rc.d/iwi.sh). and /var/log/messages did not get _anything_ on the Gx280 for several days. These are RELENG_6 from last week (after 6.1 release date) on both a Dell Gx280 and an Inspiron 6000. Updated: I just did cvs/build/install world yesterday (Tuesday 5/16) on the Gx280 and the /var/log/messages log is now getting updates. I'll try a rebuild on the laptop tonight and see if it clears both problems there too. -- Don Wilde Org 01737 505-844-1126 I didn't get a toy train like the other kids. I got a toy subway instead. You couldn't see anything, but every now and then you'd hear this rumbling noise go by. - Steven Wright _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
