Hi folks, the current FreeBSD STABLE version still has massive problems detecting my AVM PCMCIA B1 active ISDN card. I am currently running 6.0-RELEASE-p5 and all that it tells me is that the card it found "has no functions". I booted in verbose- mode and enabled multiple debugging mechanisms and ended up with the following messages in dmesg:
cbb0: <RF5C475 PCI-CardBus Bridge> irq 23 at device 11.0 on pci2 pcib2: cbb0 requested memory range 0xeb000000-0xed7fffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xeb001000 cbb0: Found memory at eb001000 cbb0: Secondary bus is 0 cbb0: Setting primary bus to 2 cbb0: Secondary bus set to 3 subbus 4 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x04751180 0x02100007 0x06070081 0x00022000 0x10: 0xeb001000 0x020000dc 0x20040302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000117 0x40: 0x00000000 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci2: <network> at device 12.0 (no driver attached) ... Status is 0x30000410 cbb0: card inserted: event=0x00000000, state=30000410 pccard0: chip_socket_enable cbb_pcic_socket_enable: cbb0: cbb_power: 5V pccard0: read_cis pcib2: pccard0 requested memory range 0xeb000000-0xed7fffff: good cis mem map 0xe564e000 (resource: 0xeb010000) pccard0: CIS tuple chain: CISTPL_END ff cis mem map e564e000 CISTPL_LINKTARGET expected, code ff observed pccard0: check_cis_quirks pccard0: Card has no functions! cbb0: PC Card card activation failed Somebody please help me as I'm completely out of ideas ... please CC me when replying, I am not subscribed to the freebsd-questions-mailinglist. -- .''`. Martin Loschwitz Debian GNU/Linux developer : :' : [EMAIL PROTECTED] [EMAIL PROTECTED] `. `'` http://www.madkiss.org/ people.debian.org/~madkiss/ `- Use Debian GNU/Linux 3.1! See http://www.debian.org/
pgpLUvZ4htWb8.pgp
Description: PGP signature
